ML Boatworks RSX310 , My 1st Outrigger design ever! 31", P/ P-ltd FE Rigger!

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
You could always make different ride pads, like Niklas recommends on his Keps FE 4SL . I'm going to try that on the boat that Brad built for me. Double sided tape and different thicknesses or even pads with angle built into them.
 
I didn't have much time last night, but I woke up this morning, lined up where the stuffing tube will go through, and cut that in the floor, and glued down the motor mount. I will start sheeting the sponsons and rear shoes maybe tonight. Getting closer and closer!! I cannot wait!

20160628_071618_zpsv3onlorv.jpg


20160628_071622_zpsrnnauvll.jpg


20160628_072137_zpsxz9idmbo.jpg

-
 
You could always make different ride pads,
That's how I do all mine these days. At the rate we have to replace booms in these things, I'd rather have that part be easy. It's REALLY not that difficult to get the AoA, or Ride-Height, adjusted using stick-on ride-pads. Way easier than a shim-system, and gluing in pass-through tubes into the tub makes is stronger too.
 
Just an update. I am still working on this thing, just had a lot going on with other projects the last few days. Doing some of the little things needed right now. More pics soon! Mike
 
FE Version:1) Darin Jordan OSE

2) Terry Davis OSE

3) Kent Seal IW

4) Paul 785 x 4 kits OSE5) Jerry Muro/ Boatnutz IW/OSE6) JHL1963 OSE7) Reed Eagle OSE

8) Maryland FE- Pete Welty Jr. OSE 9) bhorowitz- Bob Horowitz OSE10) Nitro Version, when available:1)Glenn Quarles wants to test2) Rockin Robin Stebbins?

3) Shane Bastick

4) Dale Hobbs x 2 kits- Facebook
BTW Mike, you can remove that ? beside my name (-;
 
FE Version:1) Darin Jordan OSE2) Terry Davis OSE3) Kent Seal IW4) Paul 785 x 4 kits OSE5) Jerry Muro/ Boatnutz IW/OSE6) JHL1963 OSE7) Reed Eagle OSE8) Maryland FE- Pete Welty Jr. OSE 9) bhorowitz- Bob Horowitz OSE10) Nitro Version, when available:1)Glenn Quarles wants to test2) Rockin Robin Stebbins?3) Shane Bastick4) Dale Hobbs x 2 kits- Facebook
BTW Mike, you can remove that ? beside my name (-;
Like this:

Rrrrocking Rrrrobin Stebbins!!! : )
 
FE Version:1) Darin Jordan OSE2) Terry Davis OSE3) Kent Seal IW4) Paul 785 x 4 kits OSE5) Jerry Muro/ Boatnutz IW/OSE6) JHL1963 OSE7) Reed Eagle OSE8) Maryland FE- Pete Welty Jr. OSE 9) bhorowitz- Bob Horowitz OSE10) Nitro Version, when available:1)Glenn Quarles wants to test2) Rockin Robin Stebbins?3) Shane Bastick4) Dale Hobbs x 2 kits- Facebook
BTW Mike, you can remove that ? beside my name (-;
Like this:

Rrrrocking Rrrrobin Stebbins!!! : )
Get it right Kent, it's only 3 r's.
default_laugh.png
RRRay
 
FE Version:1) Darin Jordan OSE2) Terry Davis OSE3) Kent Seal IW4) Paul 785 x 4 kits OSE5) Jerry Muro/ Boatnutz IW/OSE6) JHL1963 OSE7) Reed Eagle OSE8) Maryland FE- Pete Welty Jr. OSE 9) bhorowitz- Bob Horowitz OSE10) Nitro Version, when available:1)Glenn Quarles wants to test2) Rockin Robin Stebbins?3) Shane Bastick4) Dale Hobbs x 2 kits- Facebook
BTW Mike, you can remove that ? beside my name (-;
Like this:

Rrrrocking Rrrrobin Stebbins!!! : )
Get it right Kent, it's only 3 r's.
default_laugh.png
RRRay
Lol! ; )
 
Updated list. Been out of town till yesterday. I will have this thing ready to run by this weekend. More pics tonight. I plan on sheeting the sponsons tonight, and the rear shoes as well.

FE Version:


1) Darin Jordan OSE
2) Terry Davis OSE
3) Kent Seal IW
4) Paul 785 x 4 kits OSE

5) Jerry Muro/ Boatnutz IW/OSE
6) JHL1963 OSE
7) Reed Eagle OSE
8) Maryland FE- Pete Welty Jr. OSE

9)
bhorowitz- Bob Horowitz OSE

10) Ray Schrauwen OSE
11) rayzerdesigns OSE





Nitro Version, when available:


1)Glenn Quarles wants to test
2) Rockin Robin Stebbins

3) Shane Bastick

4) Dale Hobbs x 2 kits- Facebook
 
Back on this thing. Rear shoes sheeted, and tub exterior epoxied. Sponson top decks will be added tonight, and I am going to add a quick coat of clear to the tub tonight to protect it..paint will come later once I know this thing works...Paint color already picked tho. 2016 Jeep Wranger Mojave Sand will be the color!

20160706_174912_zpsmhujrgn4.jpg


20160706_181425_zpsmkv7ente.jpg


20160706_181633_zpsimjvobcx.jpg


20160706_182402_zps0czmhasu.jpg


20160707_074852_zpsrnmsipj1.jpg


20160707_074904_zps6htp39h1.jpg
 
Getting real close now. Sponson decks are on, and I will epoxy the outsides tonight. Tub is ready to add the gear now, so if I am really fast, and lucky, I will have this thing in the water by sunday!!!

20160707_184430_zpsrei74qaq.jpg


20160707_203400_zpsmbwmgdcr.jpg


20160707_205344_zpsthojaanx.jpg


20160708_072730_zpsxe0n07ms.jpg


20160708_072738_zpshhtrwmxh.jpg


20160708_072751_zpslfocrdxp.jpg


-
 
If the back of the boat hops you might have too much AOA on the rear sponsons. Hopefully not. Let us know how she runs!

John
 
Last edited by a moderator:
Thanks John, it is at 3.25 degrees right now. If I have to adjust it, I can shim them easily so it wont be a deal breaker! haha. I will keep everyone updated when it goes in the water.
 
Ray, I posted on FB giving you props for making them. When I saw them in your pics, I knew I had to make some! They are the deal!!!! Made decking those sponsons an absolute breeze. Might even get me building for customers again! haha
 
Back
Top