LuizBarbetta
Well-Known Member
- Joined
- May 23, 2005
- Messages
- 155
Hey Buddy, Bom saber ;-)Hello Luiz..I´m Portuguese, mas se falar em portugues, ninguem vai entender...
If you want help you can PM me...i will try to help you.....the same way all the intlwaters guys will do....
Don´t use a V or high lift prop with a JAE...The JAE is built with a single back sponson for supporting the prop, so you don´t need lift for the back. start with a 1650 ..you are using a 1340 kv motor on a oval boat with 8S......It´s like a motor, start rich and start leaning, and not strat len, and richen it up....
i´m also making a JAE twin .45 for 8S with a leopard, but using a 1090kv motor...Beware...high KV..high cell count...large prop..usually..LARGE smoke... ;D
Best Regards
The Boat setup running the 1662 great! the motor have so much stronger! he broke the Octura 1662 in the half! LOL I will try see if any boaters get a pictures from the prop!Try the 1455 first be careful with that 1662 remember low to mid lift props . Plus 7mm is a large jump in addition to the increased pitch ratio from a mild 1455. Id be looking at a 450-452 @ 40k . really havent seen many speak of running above 55 mm props but maybe they did and didnt report it :unsure: . On my twin im starting with x455's t/b cut trimmed down to around 52mm. Main thing - get a way from that vseries prop . That leo wont turn a big gas prop the same as a gas motor. Even though the leo boast 7 or so hp the torque curve and rpm range of your setup is totally different. With your setup your looking at around 40k loaded so you need to step down on the prop diameter Im thinking. Be mindful of your amp draw as you play!
Forgot to post pic....Hello Luiz..I´m Portuguese, mas se falar em portugues, ninguem vai entender... If you want help you can PM me...i will try to help you.....the same way all the intlwaters guys will do.... Don´t use a V or high lift prop with a JAE...The JAE is built with a single back sponson for supporting the prop, so you don´t need lift for the back. start with a 1650 ..you are using a 1340 kv motor on a oval boat with 8S......It´s like a motor, start rich and start leaning, and not strat len, and richen it up.... i´m also making a JAE twin .45 for 8S with a leopard, but using a 1090kv motor...Beware...high KV..high cell count...large prop..usually..LARGE smoke... ;D Best Regards
Thank you..Obrigado...AWESOME, looks great ;-) Congratulations.!
Enter your email address to join: