• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

WTB used hardware to put in a couple 20 size boats

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tmunn

Well-Known Member
Joined
Jun 12, 2006
Messages
1,560
I am going to be working on the following boats soon and need some GOOD used hardware if it's available to help keep the cost down.I would prefer to get as much as i can from one seller to help keep the shipping down.

let me know what you have via pm's or e-mail.

[email protected]

.21 A/C Model catamaran

1)Futaba servo suitable for rudder "J" connector if i need something stronger than a 3003 or a s 148

2)futaba Mini servo for the throttle "j "connector .

3)Rudder

4)Strut and bracket with a deep blade needed for the cats.

5)Short .187 flexi with 3/16 prop shaft.

6)Motor mount suitable for a .21 cat.

7) 2 of 1/4 x 28 motor to flexshaft collet suitable for 3.5 k&b or ops .21

20 size calcraft mono

1)Motor mount for mono

2).187 flexi with 3/16 prop shaft

Maybe some 20 size pipes they can be non muffled since noise is not a problem where we run

Maybe some suitable props for either of these hulls.

Thanks a lot guys

Terry
 
Back
Top