WTB 7.5 OUTBOARD IRWIN STAMP PIPE

[nuzum]

ANYBODY HAVE ONE FOR SALE ????

 

[waltr]

Todd,

I have a couple that I'm not using.

I'll get you a pic.

Did you get the cast 21 pipe yet?

 

[Greg Martin]

I have a manifold, but cannot find the pipe (fit KB 7.5)

 

[nuzum]

I have a manifold, but cannot find the pipe (fit KB 7.5)

THANKS YES I GOT PIPE VERY NICE I WILL TAKE THE IRWIN PIPE AND GREG I WILL TAKE THE MANIFOLDIF IT WILL FIT A ROSSI OR NELSON LET ME KNOW PRICES GUYS THANKS !!!!

 

[Greg Martin]

I have a manifold, but cannot find the pipe (fit KB 7.5)

THANKS YES I GOT PIPE VERY NICE I WILL TAKE THE IRWIN PIPE AND GREG I WILL TAKE THE MANIFOLDIF IT WILL FIT A ROSSI OR NELSON LET ME KNOW PRICES GUYS THANKS !!!!

Don't know if it will work on your Rossi, it did fit KB, maybe someone can chime in here that knows if they are compatable.

 

[Greg Martin]

I have a manifold, but cannot find the pipe (fit KB 7.5)

THANKS YES I GOT PIPE VERY NICE I WILL TAKE THE IRWIN PIPE AND GREG I WILL TAKE THE MANIFOLDIF IT WILL FIT A ROSSI OR NELSON LET ME KNOW PRICES GUYS THANKS !!!!

Don't know if it will work on your Rossi, it did fit KB, maybe someone can chime in here that knows if they are compatable.

Maybe this willhelp[attachmen

t=11064:manifold_001.JPG]

 

[nuzum]

I have a manifold, but cannot find the pipe (fit KB 7.5)

THANKS YES I GOT PIPE VERY NICE I WILL TAKE THE IRWIN PIPE AND GREG I WILL TAKE THE MANIFOLDIF IT WILL FIT A ROSSI OR NELSON LET ME KNOW PRICES GUYS THANKS !!!!

Don't know if it will work on your Rossi, it did fit KB, maybe someone can chime in here that knows if they are compatable.

Maybe this willhelpView attachment 11066View attachment 11065[attachmen

t=11064:manifold_001.JPG]

No its a slip on on the rossi and nelson thanks greg!!!!!!!

 

[Greg Martin]

I have a manifold, but cannot find the pipe (fit KB 7.5)

THANKS YES I GOT PIPE VERY NICE I WILL TAKE THE IRWIN PIPE AND GREG I WILL TAKE THE MANIFOLDIF IT WILL FIT A ROSSI OR NELSON LET ME KNOW PRICES GUYS THANKS !!!!

Don't know if it will work on your Rossi, it did fit KB, maybe someone can chime in here that knows if they are compatable.

Maybe this willhelpView attachment 11066View attachment 11065[attachmen

t=11064:manifold_001.JPG]

No its a slip on on the rossi and nelson thanks greg!!!!!!!

glad we could figure that out before an exchange was made!!!

 

[waltr]

Todd,

Here's a couple of pics of 2 pipes I have. I've never ran either one, they're just in "the pipe pile".

There are a couple of small dings and scratches, but overall, not bad. It looks to me that the muffler is held on by JB Weld and a set screw, so it can be removed , but I'd try it 1st, especially with the noise restrictions we have. The little ribs are bent in, but I'm sure they can be pulled back out with a small 90* allen wrench or similar.

I'd like to get $50 plus shipping each, or both shipped for $100 if you want them.

And with everything I sell, if you don't like it, before you run it, I'll take it back.

LMK.

As far as headers, the only header that I know of that fits a Nelson is from John Otto, Technology Hobbies. That's where I got mine from. He also makes nice carbs for them that fit. Call them.

http://www.technologyhobbiesinc.com/

For the Rossi header, Hyperperformance products has them.

http://hyperprod.bizhosting.com/outboard_motors.html

 

[nuzum]

Todd,Here's a couple of pics of 2 pipes I have. I've never ran either one, they're just in "the pipe pile".

There are a couple of small dings and scratches, but overall, not bad. It looks to me that the muffler is held on by JB Weld and a set screw, so it can be removed , but I'd try it 1st, especially with the noise restrictions we have. The little ribs are bent in, but I'm sure they can be pulled back out with a small 90* allen wrench or similar.

I'd like to get $50 plus shipping each, or both shipped for $100 if you want them.

And with everything I sell, if you don't like it, before you run it, I'll take it back.

LMK.

As far as headers, the only header that I know of that fits a Nelson is from John Otto, Technology Hobbies. That's where I got mine from. He also makes nice carbs for them that fit. Call them.

http://www.technologyhobbiesinc.com/

For the Rossi header, Hyperperformance products has them.

http://hyperprod.bizhosting.com/outboard_motors.html

hi waltr i will take the one without muffler just give me total and your paypal again thanks buddy

 

[LarryConrad]

Todd,Here's a couple of pics of 2 pipes I have. I've never ran either one, they're just in "the pipe pile".

There are a couple of small dings and scratches, but overall, not bad. It looks to me that the muffler is held on by JB Weld and a set screw, so it can be removed , but I'd try it 1st, especially with the noise restrictions we have. The little ribs are bent in, but I'm sure they can be pulled back out with a small 90* allen wrench or similar.

I'd like to get $50 plus shipping each, or both shipped for $100 if you want them.

And with everything I sell, if you don't like it, before you run it, I'll take it back.

LMK.

As far as headers, the only header that I know of that fits a Nelson is from John Otto, Technology Hobbies. That's where I got mine from. He also makes nice carbs for them that fit. Call them.

http://www.technologyhobbiesinc.com/

For the Rossi header, Hyperperformance products has them.

http://hyperprod.bizhosting.com/outboard_motors.html

hi waltr i will take the one without muffler just give me total and your paypal again thanks buddy

Hey Todd,

Next time you need a outboard pipe maybe you should ask waltr first! :lol: :lol: He is doing a fantastic job of hooking you up with what you need.

Larry

 

[nuzum]

Todd,Here's a couple of pics of 2 pipes I have. I've never ran either one, they're just in "the pipe pile".

There are a couple of small dings and scratches, but overall, not bad. It looks to me that the muffler is held on by JB Weld and a set screw, so it can be removed , but I'd try it 1st, especially with the noise restrictions we have. The little ribs are bent in, but I'm sure they can be pulled back out with a small 90* allen wrench or similar.

I'd like to get $50 plus shipping each, or both shipped for $100 if you want them.

And with everything I sell, if you don't like it, before you run it, I'll take it back.

LMK.

As far as headers, the only header that I know of that fits a Nelson is from John Otto, Technology Hobbies. That's where I got mine from. He also makes nice carbs for them that fit. Call them.

http://www.technologyhobbiesinc.com/

For the Rossi header, Hyperperformance products has them.

http://hyperprod.bizhosting.com/outboard_motors.html

hi waltr i will take the one without muffler just give me total and your paypal again thanks buddy

Hey Todd,

Next time you need a outboard pipe maybe you should ask waltr first! :lol: :lol: He is doing a fantastic job of hooking you up with what you need.

Larry

yes he is the pipe master LOL

 

[nuzum]

Todd,Here's a couple of pics of 2 pipes I have. I've never ran either one, they're just in "the pipe pile".

There are a couple of small dings and scratches, but overall, not bad. It looks to me that the muffler is held on by JB Weld and a set screw, so it can be removed , but I'd try it 1st, especially with the noise restrictions we have. The little ribs are bent in, but I'm sure they can be pulled back out with a small 90* allen wrench or similar.

I'd like to get $50 plus shipping each, or both shipped for $100 if you want them.

And with everything I sell, if you don't like it, before you run it, I'll take it back.

LMK.

As far as headers, the only header that I know of that fits a Nelson is from John Otto, Technology Hobbies. That's where I got mine from. He also makes nice carbs for them that fit. Call them.

http://www.technologyhobbiesinc.com/

For the Rossi header, Hyperperformance products has them.

http://hyperprod.bizhosting.com/outboard_motors.html

hi waltr i will take the one without muffler just give me total and your paypal again thanks buddy

Hey Todd,

Next time you need a outboard pipe maybe you should ask waltr first! :lol: :lol: He is doing a fantastic job of hooking you up with what you need.

Larry

yes he is the pipe master LOL

money sent waltr

 

[waltr]

Todd,Here's a couple of pics of 2 pipes I have. I've never ran either one, they're just in "the pipe pile".

There are a couple of small dings and scratches, but overall, not bad. It looks to me that the muffler is held on by JB Weld and a set screw, so it can be removed , but I'd try it 1st, especially with the noise restrictions we have. The little ribs are bent in, but I'm sure they can be pulled back out with a small 90* allen wrench or similar.

I'd like to get $50 plus shipping each, or both shipped for $100 if you want them.

And with everything I sell, if you don't like it, before you run it, I'll take it back.

LMK.

As far as headers, the only header that I know of that fits a Nelson is from John Otto, Technology Hobbies. That's where I got mine from. He also makes nice carbs for them that fit. Call them.

http://www.technologyhobbiesinc.com/

For the Rossi header, Hyperperformance products has them.

http://hyperprod.bizhosting.com/outboard_motors.html

hi waltr i will take the one without muffler just give me total and your paypal again thanks buddy

Hey Todd,

Next time you need a outboard pipe maybe you should ask waltr first! :lol: :lol: He is doing a fantastic job of hooking you up with what you need.

Larry

yes he is the pipe master LOL

money sent waltr

The Pipe Master? :lol: :lol: :lol:

Just happy to help and also don't mind shrinking my inventory a bit.

There's just to much stuff here, wonder how that happened? :huh:

I did get the Pay Pal. Thanks!!

It should ship tomorrow if I can get to the post office.