Which side should I run the pipe on

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

LarryConrad

Well-Known Member
Joined
Jan 20, 2007
Messages
2,773
20 size Speedmaster, Novarossi motor, Should I run the pipe on the Port side or Starboard side?

Larry
 
20 size Speedmaster, Novarossi motor, Should I run the pipe on the Port side or Starboard side?
Larry
i would run it on the starboard side so when you toss the boat in or retreve it to adjust with the needle you wont burn your fingers.
 
20 size Speedmaster, Novarossi motor, Should I run the pipe on the Port side or Starboard side?
Larry
Starboard (right side) will make it turn better...... & it`s easier on the fingers
 
Last edited by a moderator:
Larry, I ran mine (same setup) with the pipe on the port side. Why? Because everybody else did. I had thoughts also of parting from the norm and putting mine on the right.
 
Thanks for the replies, boat was originally set up with short stroke nova with an os carb. Needle on the starboard side pipe on the port side. I guess I could try it on both sides and see which setup works the best.

Larry
 
Back
Top