Tunnel Kit

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

anders-e

Well-Known Member
Supporting Member
Joined
Aug 22, 2005
Messages
219
I.m looking for a tunnelkit for FE about 33-40 inch long

for 40 size engine 5 or 6 s battery

//Anders
 
Last edited by a moderator:
The Thor 355 kit from Van's racing.Carl Van Houten
 
Last edited by a moderator:
I normally don't advertise, but I happen to have an M13 kit ready to go if you are interested. Otherwise the PTI stuff is good and works without mods.

Will easily fit 4s and some 5s....6s would be silly in this size hull IMO
default_smile.png


[SIZE=11pt]https://youtu.be/AHTuHNHgJ1o[/SIZE]

[SIZE=11pt]PM if interested[/SIZE]
 
The Thor 355 kit can be built for nitro or fast elec.It comes in one kit.
 
If you are looking for 6s lipo power, you need to look at the QX-400 PTI tunnel from Paul above. You need that kind of length to handle the power. A shorter hull will struggle.
 
I agree with Mike. To really use 6s properly a 38-40" good hull is important. Boats under 36" are just not able to utilize the power properly unless water is calm.

Proper 4s setups need hulls around 32-34" for same reasons.

So it depends on what you need and want to get out of it. Good luck with what ever you choose and have fun.

Kris
 
I normally don't advertise, but I happen to have an M13 kit ready to go if you are interested. Otherwise the PTI stuff is good and works without mods.

Will easily fit 4s and some 5s....6s would be silly in this size hull IMO
default_smile.png


[SIZE=11pt]https://youtu.be/AHTuHNHgJ1o[/SIZE]

[SIZE=11pt]PM if interested[/SIZE]
Hey Kris, shoot me a pm with the price on that M13 if Anders passes, I always thought that was a great running boat.

Thanks .
 
Back
Top