Sport 21 Propellers

[shoboat]

Boaters,

I have been getting a lot of Sport 21 requests for propeller work. I would just

like to see some different approaches to the Sport 21 setups. Right now it seems

the Prather 215,Octura 1640,X-640,X-440/3,and a H-4 cut down to 40mm all are

working real well. What is working for you?

Thanks, B)

Mark Sholund

Props-4-U

[email protected]

 

[Grimracer]

Mark

1740 is what we have been running on out paynpak hulls.

We have also tryed and liked the H-2 (need alot of motor) and the 1.6.

Rock on

Grim

 

[shoboat]

Grim,

The prop shop 4213/3 might be a good choice also. Are you running the 1740/3

or just the Two Bladed version? The H-2 would need to be reduced a little so

the" big motor " that you run should spin it a little better. :lol: :lol: :lol:

Thanks for the input Mike,

Mark Sholund

 

[Grimracer]

Mark

yea the new prop shop prop is going to be first bite this spring.

We have tryed both and the 2 bladed 1740s and the versions.. its the two that we like.

I need to do some testing with the h-2...mid fifyts are the norm for the prop but only if you have the motor.... the hull says back off bud... or im going to make you go for a boat ride... :lol:

ROCK ON

Grim

 

[Jerry T]

Anybody tried a 1740 with a MAC 21 on a sport 20? I don't know if it will spin it fast enough.

Jerry

 

[Roy Munoz]

The Prather 220 pitch up works fpr me on my set up..Nova Rossi L.S.. Irwin Q Pipe .....

 

[shoboat]

Boaters,

The new 1614 or the 1714 would probably work well in a Sport 21. I have a

few in the testing stages right now,I will pass on any good information when

I receive some of the feedback.

Thanks,

Mark Sholund

Props-4-U