dwilfong
Well-Known Member
- Joined
- Jul 1, 2008
- Messages
- 5,968
I am going to try and mod a small slide carb to run on the big nitro engs.
http://www.ebay.com/itm/180666477460?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Cheep enough to play with at $25 shipped to the house.
Also many different needle jets and needles available for this carb design.
going to remove the main jet and put a fuel control valve thew the bottom of the bowl controlled by the 3rd channel.
Will use a design like the fuel doctor set up with a slot to control flow.
This way all adjustment will be done with the servo. From full flow to no flow with just the servo.
Will post some pics as I go with this project.
David
http://www.ebay.com/itm/180666477460?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Cheep enough to play with at $25 shipped to the house.
Also many different needle jets and needles available for this carb design.
going to remove the main jet and put a fuel control valve thew the bottom of the bowl controlled by the 3rd channel.
Will use a design like the fuel doctor set up with a slot to control flow.
This way all adjustment will be done with the servo. From full flow to no flow with just the servo.
Will post some pics as I go with this project.
David