SGX rear strut setup (without centre sponson)

[Tim van Schyndel]

I have a rebuilt SGX 67 which has a removed centre rear sponson. Just after a general starting point for height and angle.

Cheers in advance!

Tim

 

[JeremyEdge]

.105-.108

 

[Andy Brown]

Jeremy, his boat if different than yours.

Set the strut angle 1.5 degrees. Rear sponsons should set about .030" above surface.

Right front sponson top Level. Left sponson tip down about .080" to .100".

 

[Tim van Schyndel]

Thanks Andy and Jeremy.