Quickdraw Hot Pipes 90, 100 or 106 degree New $150.00 Shipped US

[Don Shanks]

This pipe is designed with a huge tapered head pipe. This gives big gains at mid range and top end. It also incorporates a flex joint where the head pipe meets the main body. This joint virtually eliminates pipe cracking. This allows Quickdraw to make the main body out of very light gauge material and this keeps the weight of the pipe under 12 ounces. (This is very light for a steel pipe; by comparison aluminum pipes usually come in around 8 ounces. They don't make aluminum pipes because they have never seen one to equal the power of a steel pipe. The resonant pulse waves get absorbed by the softer aluminum.) This pipe is available in either 90, 100, and 106 degrees. All these pipes perform identically, there is no loss or change in performance between the different routing configurations. In the photographs, note the head pipe. You can see the taper in it and also note the coupling that the flex slips into. It has inner and outer walls, it is the same way on the body of the pipe. This keeps exhaust leakage around the flex to an absolute minimum.

These are brand new pipes finished in the degree you want.Comes with your choice of flex length flex and a set of new springs and Viton O rings. These are built in a jig to ensure everything is in line and angles are correct. Pipes are set up with internal or external stinger. Internal stinger has a 1/8" chamfered drain hole 1/4" inside. These come with High temp baked on coating. Please state how you want it finished. Can also make Whiplash or Backlash and GV headers at the same price. Free shipping to US and will quote international. PayPal is
[email protected]
. Whiplash, Backlash and GV pipes are the same price

 

[happybradboating]

PM Sent