Props for 3.5 Hydro's

[GavinP]

I have always run Prather props because of their easy to follow recommended chart.

I was wondering what are the ABC and Octura props that are as close to the Prather 215 , 220, 225.

I use the Prather props on a 3.5 Outrigger and also on a Sports 20 Hydro.

Prather props are becoming harder to obtain and I have heard the ABC props are better.I would like to try a few different props this coming season.

I do no a little about the pitch but have always thought the other prop makers should give some recommendations like the Prather people do.

:blink: <_<

 

[FloridaScaleBoater]

Gavin;

How bout this

http://www.namba19.com/p_chart/chart.html

Rick

 

[Brad Christy]

Gavin,

We are liking the H-10 or the H-6 cupped to 3.6", both de-tongued. We also like the 1716, 1717 and the 1816. For Octura, try the 1445 cupped to anywhere from 3.4-4.0". The 1650 is also a good prop if you can pull it. I run one cut down to about 43.5mm and de-tongued.

Thanks. Brad.

Titan Racing Components

BlackJack Hydros

 

[GavinP]

Gavin;How bout this

http://www.namba19.com/p_chart/chart.html

Rick

Thanks Rick the Chart is just what I have been looking and asking for but no one seemed to have.I have just printed it off and will give it very close scrutiny

 

[GavinP]

Gavin,
We are liking the H-10 or the H-6 cupped to 3.6", both de-tongued. We also like the 1716, 1717 and the 1816. For Octura, try the 1445 cupped to anywhere from 3.4-4.0". The 1650 is also a good prop if you can pull it. I run one cut down to about 43.5mm and de-tongued.

Thanks. Brad.

Titan Racing Components

BlackJack Hydros

Thanks Brad , The h-10 and h-6 props I assume are the Tidewater props.and the 1716,1717 &1816 Octura ??? :unsure: :blink: :huh:

 

[FloridaScaleBoater]

Gavin;

What Prather prop were you running on your Sport21?

What engine were you running?

Any "mods" to the prop?

Rick

 

[Richard Dahlheimer]

Gavin,
We are liking the H-10 or the H-6 cupped to 3.6", both de-tongued. We also like the 1716, 1717 and the 1816. For Octura, try the 1445 cupped to anywhere from 3.4-4.0". The 1650 is also a good prop if you can pull it. I run one cut down to about 43.5mm and de-tongued.

Thanks. Brad.

Titan Racing Components

BlackJack Hydros

Thanks Brad , The h-10 and h-6 props I assume are the Tidewater props.and the 1716,1717 &1816 Octura ??? :unsure: :blink: :huh:

Gavin, all the props in your last post are ABC. Three more to add......... ABC H-5 ABC 50x69 ABC H-7 Richard D

 

[GavinP]

Gavin;What Prather prop were you running on your Sport21?

What engine were you running?

Any "mods" to the prop?

Rick

The props I have been using on the sport 20 are the 215 or 220 .It is a OS 25 max motor.Props are sharpened and balanced but no other mods.OS motor is stock standard.

 

[FloridaScaleBoater]

Thanks Gavin,

I have a S220

Guess I'll have to give it a try next time out testing.

Rick