Prop For Go 28 Powered 34" Mono Hull

[ian thompson]

Hi all as the title says what would be a good starting point for a prop for a 34" mono hull . Beam is 10.5"..Based on a wildthing..

Engine is a std GO28 ..This is my first boat build..been aeromodelling for years

thanks for your time

Ian

 

[David Ashcroft]

Gday Ian ,,I got some 21 size props you can try ,,I will bring them to the lake Sunday..

David

 

[shoboat]

Ian,

Cut down a Octura X-447/3 to 45 mm and see you that works for you?

Some pitched up 1614/3 Choppers may be another good set up, but I

think you will like a little more diameter than 41 mm. You may want to

try the 1714/3 and 1814/3 also in the cleaver style of blade configuration.

Have Fun Testing,

Mark Sholund

 

[shoboat]

Ian,

Cut down a Octura X-447/3 to 45 mm and see if that works for you?

Some pitched up 1614/3 Choppers may be another good set up, but I

think you will like a little more diameter than 41 mm. You may want to

try the 1714/3 and 1814/3 also in the cleaver style of blade configuration.

Have Fun Testing,

Mark Sholund