Blake johnson
Member
- Joined
- Mar 20, 2011
- Messages
- 20
I have a cmb 90 and a Mac pipe. What length should it be cut at?
Blake
Blake
Depend on what kind of boat? CMB90s Gold head w/ MAC big belly 1" pipe 12" fastest for my Twin rigger. I never cut at pipe or header so I punch flare on pipe and connect( tapped) header I.D and pipe O.D Reason can play adjust +/- 3/4" more safe because trip different place state..If you cut header or pipe so the coupler will blow out hole or burn melt also lot of replace new couplers Good Luck!I have a cmb 90 and a Mac pipe. What length should it be cut at?
Blake
better start 13" will play adjust down 1/4" more aprox about 1 inch run with your mono Good Luck!I have it in a sightler 50" rail. Right now the pipe is 16" long and the header is 3" long.
16 inches, measured from where to where? If you have too, shorten the header. 12 inches is center of cylinder to start of pipe belly. B)I have it in a sightler 50" rail. Right now the pipe is 16" long and the header is 3" long.
Enter your email address to join: