• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold NOVAROSSI TO-BE .67 OB stuff

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Joern Markset

Well-Known Member
Supporting Member
Vendor
Joined
Oct 25, 2004
Messages
1,122
Novarossi To-Be .67 outboard - Never fired or seen fuel, has been sitting on a newbuilt boat for display, includes uncut header & springs

Novarossi To-Be .67 outboard - Was used for a demo, has a gallon of (or slightly less) fuel thru it. Header cut to length. Extra cooling ring removed to achieve some proper temp.

Pipes, Silver Bullet and Salisbury. Silver Bullet was used on the above mentioned engine. Salisbury is new and undrilled

2 x PTO housing with bearings, this is the conversions I made for .91 engines. There is also .67 PTO shafts that has to be grinded a little (I used to do that for the .91)
and there is also flywheels. (One kit has been installed in an engine for demo)

Spareparts: 2 x Conrod, 2 x Bearing kit (16450+17451), 2 x Screw kit, 5 x Shim set, 2 x Wristpin, 9 x Wristpin clip set

Price is $ 1000,- firm, this includes shipping to you. (PP fee not included)
 

Attachments

  • IMG_1635.jpg
    IMG_1635.jpg
    1.8 MB · Views: 1
  • IMG_1636.jpg
    IMG_1636.jpg
    1.2 MB · Views: 1
  • IMG_1637.jpg
    IMG_1637.jpg
    1.4 MB · Views: 1
  • IMG_1639.jpg
    IMG_1639.jpg
    2.1 MB · Views: 1
  • IMG_1640.jpg
    IMG_1640.jpg
    1.8 MB · Views: 1
  • IMG_1642.jpg
    IMG_1642.jpg
    1.5 MB · Views: 1
  • IMG_1643.jpg
    IMG_1643.jpg
    1.7 MB · Views: 1
  • IMG_1644.jpg
    IMG_1644.jpg
    1.8 MB · Views: 0
  • IMG_1645.jpg
    IMG_1645.jpg
    987.8 KB · Views: 0

Latest posts

Back
Top