leopard 4092

[jeff baham]

guy I have a chance to get a leopard 4092 930kv motor only , my question is " will this motor be to much for a 6s rigger.

what application can this motor be use for

 

[Steven Bryant]

Hi Jeff the kv is too low to be used on 6s, you really need 1400 to 1600kv

 

[John Dufek]

I use that 4092 1730kv on 6s in an old Jae .45g turned FE, runs in the 70's no trouble , stepin it up to a 2030kv this summer.

i had to widen the ski on bottom a little.

 

[jeff baham]

ok thanks guy what S pack will this motor need to turn it,

 

[Steve Ballinger]

Normally that would be a 8-10s motor.

 

[gil sonsino]

Definetively too low kv's for 6S....I have a pair of 4092 (2080kv) in my twin rigger on 6S...zero issues.with T 180 with capbank.

 

[jeff baham]

ok thanks guys

 

[jeff baham]

hey gil have any picture of your twin rigger setup and a video of it running.

 

[gil sonsino]

Jeff sent you a pm here's a link to my twin rigger: http://grsboats.com.br/novosite/?portfolio=grx-twin-fe-rigger

Thanks

Gill