rctinman
Well-Known Member
- Joined
- Dec 5, 2003
- Messages
- 1,606
Hi Folks, I picked this up with a sport 40 I picked up over the weekend. I don't run MACs, so it needs to go. This shows ownership of a new boater. Drilled out mounting lug holes, chewed up holes in the flywheel from using to wrong size pin, etc. The piston has a few scratches, no gouges though, and the sleeve looks fair, with some bump left in it. I've not done a thing to it other than disassemble, degreasing, and inspection. There are many usable parts here, and with a little clean-up, and a new set of bearings, this would make a good sport 40 engine, or someones first race engine for not a lot of money. That being said, If you're going to pay this amount, and expect to get a top shelf engine, please move on.
$120.00, shipped in the con. U.S. U.S. sales only please.
Thanks,
Steve Ball
![SAM_4473 (2).JPG SAM_4473 (2).JPG](https://cdn2.imagearchive.com/intlwaters/data/attachments/29/29956-ef16ee121551ef789e1aa3e0dc2b1f8e.jpg)
![SAM_4474 (2).JPG SAM_4474 (2).JPG](https://cdn2.imagearchive.com/intlwaters/data/attachments/29/29957-a985cc483b9aebc05acee78e9fc36386.jpg)
![SAM_4471 (2).JPG SAM_4471 (2).JPG](https://cdn2.imagearchive.com/intlwaters/data/attachments/29/29958-bcee2349d2b6b2a8f170651f80b7ceb2.jpg)
$120.00, shipped in the con. U.S. U.S. sales only please.
Thanks,
Steve Ball
![SAM_4473 (2).JPG SAM_4473 (2).JPG](https://cdn2.imagearchive.com/intlwaters/data/attachments/29/29956-ef16ee121551ef789e1aa3e0dc2b1f8e.jpg)
![SAM_4474 (2).JPG SAM_4474 (2).JPG](https://cdn2.imagearchive.com/intlwaters/data/attachments/29/29957-a985cc483b9aebc05acee78e9fc36386.jpg)
![SAM_4471 (2).JPG SAM_4471 (2).JPG](https://cdn2.imagearchive.com/intlwaters/data/attachments/29/29958-bcee2349d2b6b2a8f170651f80b7ceb2.jpg)