Kris Flynn
Well-Known Member
- Joined
- Mar 11, 2002
- Messages
- 4,340
SPP NR 21 Outboard Carbon Pipe...Light use and in great condition. Sold Shipped
Crude Header plate for OS outboard free gone
OS XM (nickle) liner (no poston), almost brand new if not brand new. I am pretty sure I bought this, then used the piston in an Rg Liner I had machined down (dont know why). This has no marks or scraches indicating it has been installed in a motor at all, so it would be great if you have a damaged/worn liner and a good piston. Obviously the fit could be anywhere with a different used picton though. $35 Shipped
MAC 21 Liner (great shape) with a brand new Piston made by Ken Retallic Engineering, never used. This was my backup piston and liner. $70 Shipped
Precision Boats Nova Conversion (14mm crank), with modified OS lower unit. Crank has been modified (flowed and timing) by OZSPEC Racing. PTO needs new bearings, otherwise this is a great conversion kit for someone who has a motor sitting around. It DOES include a water pickup and prop shaft assembly! This setup does over 60 REAL MPH all day long in a lightly modded nova. 4 Shafts are included at the required 138mm length.
This conversion holds the AMPBA SAW record at a measly 92.01 KPH, and the 2-lap record at less than a second behind Drakes record in the states (when converted). Only reason for selling it to consolidate my parts and just keep a spare crank from Lights instead of this whole conversion.
SOLD Shipped (i will now include new bearings)
OS XM powerhead and muffler, this is my spare motor, but my wife is not currently racing so the parts I have will keep me going if my other motor quits. It has an RG liner in it which has had 4-5 tanks through it to start the breakin process. Fit is still great and smooth. I also did fresh bearings, conrod, pin and clips when I installed the new piston and liner. Motor is stock apart from the liner being from an RG motor. SOLD Sshipped Can make it a complete outboard for $260 Shipped (including the lower unit in the picture, complete with cavplate + propshaft)
Any Questions please ask here, Reasonable offers might be accepted.
krisflynn85 at gmail.com is my paypal
Cheers
Kris
Crude Header plate for OS outboard free gone
OS XM (nickle) liner (no poston), almost brand new if not brand new. I am pretty sure I bought this, then used the piston in an Rg Liner I had machined down (dont know why). This has no marks or scraches indicating it has been installed in a motor at all, so it would be great if you have a damaged/worn liner and a good piston. Obviously the fit could be anywhere with a different used picton though. $35 Shipped
MAC 21 Liner (great shape) with a brand new Piston made by Ken Retallic Engineering, never used. This was my backup piston and liner. $70 Shipped
Precision Boats Nova Conversion (14mm crank), with modified OS lower unit. Crank has been modified (flowed and timing) by OZSPEC Racing. PTO needs new bearings, otherwise this is a great conversion kit for someone who has a motor sitting around. It DOES include a water pickup and prop shaft assembly! This setup does over 60 REAL MPH all day long in a lightly modded nova. 4 Shafts are included at the required 138mm length.
This conversion holds the AMPBA SAW record at a measly 92.01 KPH, and the 2-lap record at less than a second behind Drakes record in the states (when converted). Only reason for selling it to consolidate my parts and just keep a spare crank from Lights instead of this whole conversion.
SOLD Shipped (i will now include new bearings)
OS XM powerhead and muffler, this is my spare motor, but my wife is not currently racing so the parts I have will keep me going if my other motor quits. It has an RG liner in it which has had 4-5 tanks through it to start the breakin process. Fit is still great and smooth. I also did fresh bearings, conrod, pin and clips when I installed the new piston and liner. Motor is stock apart from the liner being from an RG motor. SOLD Sshipped Can make it a complete outboard for $260 Shipped (including the lower unit in the picture, complete with cavplate + propshaft)
Any Questions please ask here, Reasonable offers might be accepted.
krisflynn85 at gmail.com is my paypal
Cheers
Kris
Last edited by a moderator: