CMDi & OPS engines

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have now put three gallons of fuel through the OPS 45. Internally all is looking very good. Top of piston and head look new.  Virtually no metal erosion from detonation. Rod looks good. Bearings are still super smooth.

In stock form the OPS 45 has achieved 78 mph in a 67 SGX-2.  I have now modified the engine and just resumed testing with it. The engine is now accelerating to the same speeds quicker and will run faster with a bit of pipe and prop tuning.

Eric Canto and I have also been testing the OPS glow plugs on a variety of engines. Our first impressions are that we are very pleased with the performance of them. We have both conducted back to back tests with our normal favorite plugs in 4 different engines.  Considering that my assessment may be biased I think that they are at least as good. Eric on they other hand says they are better.  We have tested the OPS standard plugs in the Hot and Medium.  The Medium works equivalent to the MC#9 and K&B HP. The Hot plug burns the fuel better and seems to hold up as well as the MC#9 and K&B HP.  Yesterday I was running the Hot plug in the OPS 90 big block on 60% nitro.  The plug held up great while running a very clean mixture with big props and short pipes.

View attachment 99699
Andy that boat looks like you where hitting the Apogee.
 
very cool, thanks for the input. What pipe are you using on  the new OPS .45?
David

I have tried several different pipes on the OPS 45 and most work well, There is one that stands out above the rest, but it a Frankenstien made from several other pipe parts.

Soon my initial testing will be complete and I will report on what works best with the Stock and Modified OPS 45.
 
New to nitro motors have a ops .67 red head#666 was wondering if the water cool head play part number 397 would fit motor and the pinch head off of the ops.65 engine fit
 
Andy had posted some pictures of the 45 previously in the motors forum



Found this one on the net

ops 45.JPG

Looks to be a comparison of old vs. new cylinders as the cylinder on the right is for a four bolt head.
 
Last edited by a moderator:
New to nitro motors have a ops .67 red head#666 was wondering if the water cool head play part number 397 would fit motor and the pinch head off of the ops.65 engine fit
Darren,

I have not had my hands on the old OPS .65 but from photos I suspect the red 67 water jacket fits.
 

Latest posts

Back
Top