90 Degree Pressure Fittings

[tampa1330]

I'm looking for a set of 90 Degree pressure fittings with a M4 x 0.50 thread, preferably aluminum. Any help?

 

[FloridaScaleBoater]

I got some a couple of years ago from Horizon Hobby

I think they were a GS General Silicone product

Anodized in different colors

Good luck

 

[Rick Sowell]

I got some a couple of years ago from Horizon HobbyI think they were a GS General Silicone product

Anodized in different colors

Good luck

http://www3.towerhobbies.com/cgi-bin/wti00...=LXTT83&P=7

this is one from Tower, don't know what the thread size is? Rick

 

[FloridaScaleBoater]

I am pretty sure these are the ones I ordered.

I do remember having a hard time finding out if they were the correct thread

I has a direct link to GS webpage may be worth a phone call

Sorry, "brain fade" this should have been attached

http://search.horizonhobby.com/index.jsp?N...id=11E3DB6D94D5

 

[Ron Olson]

www.gsracing.com is the site.

 

[Mark Leyde]

www.gsracing.com is the site.

I just looked at the GS racing fittings that I have and they are not M4x0.50

Sure wish I could find some also. I need them for my .12 Novarossi water jacket.

 

[Ron Olson]

I'll do a check when I hit the LHS in a little while. Seems like the GS Racing fittings were 4mm threaded. If they have them I'm going to grab a couple of them for myself as I might need them when I get my NR.

 

[Mark Leyde]

I'll do a check when I hit the LHS in a little while. Seems like the GS Racing fittings were 4mm threaded. If they have them I'm going to grab a couple of them for myself as I might need them when I get my NR.

Ron read my post again. It said GS fittings are NOT M4x0.50. They will not fit a .12 Novarossi.

 

[Ron Olson]

Read it. I remember years ago buying some from them that were tapped for 4mm as I didn't have a tap for them. Maybe I can find another brand in 4mm.

Not trying to argue, all I know is what I bought.

 

[Mark Leyde]

Read it. I remember years ago buying some from them that were tapped for 4mm as I didn't have a tap for them. Maybe I can find another brand in 4mm.Not trying to argue, all I know is what I bought.

Yes they are 4mm Ron but they do not have the right thread pitch.

 

[shoboat]

Guys,

I have them in stock in red (3) and blue (1) colors.

I also have the nice G&S curved 21 couplers (4) in stock.

Pricing $5.00 for the set of two 90 fittings, and $10.00 for

21 curved couplers. I have had these in stock for awhile so

I don't even remember what I paid for them honestly.

They both work very well for me.

Thanks,

Mark Sholund

 

[tampa1330]

Guys,
I have them in stock in red (3) and blue (1) colors.

I also have the nice G&S curved 21 couplers (4) in stock.

Pricing $5.00 for the set of two 90 fittings, and $10.00 for

21 curved couplers. I have had these in stock for awhile so

I don't even remember what I paid for them honestly.

They both work very well for me.

Thanks,

Mark Sholund

Are those 90 fittings M4 x 50? or M4 x 70?

 

[TOM MOORE]

I used a curved K@B fitting tapped the waterjacket to 10-32 no more problem.

Tom

 

[FloridaScaleBoater]

I used a curved K@B fitting tapped the waterjacket to 10-32 no more problem.
Tom

Ditto

 

[Mark Leyde]

I used a curved K@B fitting tapped the waterjacket to 10-32 no more problem.
Tom

I think I am going to do the same.

Mark