67 nitro mono

[supercat]

Hello Guy's,

What would be a good speed to look for in heat race trim with a

Seaducer and C&B67?

Thanks,

Supercat. :unsure:

 

[Tom David]

If you can reach the low 60’s you will be very competitive.

The key also is having a good throttle response.

Happy Boating,

Tom

 

[Joe Warren]

Hello Guy's,What would be a good speed to look for in heat race trim with a

Seaducer and C&B67?

Thanks,

Supercat. :unsure:

CMB67 X460 X560 60-62 mph, Picco 67 X462 63-65 mph strut set to mfg spec.....

 

[John Finch]

Hello Guy's,What would be a good speed to look for in heat race trim with a

Seaducer and C&B67?

Thanks,

Supercat. :unsure:

CMB67 X460 X560 60-62 mph, Picco 67 X462 63-65 mph strut set to mfg spec.....

Mine ran 62 to 65 mph with an Octura x462 prop and a Pico 67.

 

[robertpickard]

Most ducers down here in fla are running in mid 60s with cmbs

 

[Steve Sutton]

Hello Guy's,What would be a good speed to look for in heat race trim with a

Seaducer and C&B67?

Thanks,

Supercat. :unsure:

CMB67 X460 X560 60-62 mph, Picco 67 X462 63-65 mph strut set to mfg spec.....

Mine ran 62 to 65 mph with an Octura x462 prop and a Pico 67.

Mine ran 60-62mph with Mac 67 with X462 Mod Prop and would run 63-65mph with Picco Blue Head EXR with X462 Mod prop. I ran 55% to 60% nitro in both engines. The Picco I found out through school of hard knocks had to run a little more oil content with 60% nito.

 

[supercat]

Guy's,

Thanks a lot. I am going to take mine for a run tomorrow and

see how i make out with it.

Supercat