Search results

Electric conversion of a great boat is complete. Next photos .............. on the water in action! http://www.intlwaters.com/index.php?autoco...si&img=2426

Unreal turn of events! Fantastic! We will wait to see another picture with the boat in your hands. Good luck with the rescue portion.

I would also agree - use the noodles. More practical and easier to deal with in the long run for any repairs and maintenance.

Bill, Start an album in the gallery link above (similar to what I have done for my thread in the outboard forum). Then click on "My albums" and then upload to your hearts content. You can then copy the page link address to this post and we will be able to click on the link and go directly to...

Yes, that is correct, Harry and Ross have taken over the Speedmaster part of Bill's business. I only have the Novarossi part. I have talked with Harry and I'm sure these guys are going to do GREAT with it. Glenn Do (will) Harry and Ross have a website listing the Speedmaster parts?

Linkage between the servo and the lower unit completed. http://www.intlwaters.com/index.php?autoco...si&img=2041

Clevises on the servo control horn and ball links on the lower unit.

Scroll down on this page and you will see all the components for the lower unit. http://www.drcwebservices.com/ffe/hardware.htm

Looks like it is a Dumas 3.5 sprint hull. Same hull I used to run. I used different wood than came with the kit. Just used the pieces for templates. I have built that hull at 10oz sealed without cowl. I think Dick Crowe still runs that hull. Mike Yes, it is a replica of the Dumas 3.5 hull. I...

This year will be the first year for our club to run electric tunnels. This is what we have proposed to keep it simple: E2 Spec class Formula E2S Hull: OPC Style Outboard Hull (Hulls limited at 33") * Must comply with existing OPC IMBPA Rules Motor: AquaCraft B36/56 Brushless Marine Motor...

Lower unit attached to the transom. Motor mounted to the lower leg. http://www.intlwaters.com/index.php?autoco...si&img=2017

Lower unit mounted to the transom. 3.5 Hi-Jack attached with 6-32 bolts via blind nuts in the transom. Custom spacer (between the motor plate and the lower unit) made with shaped plywood in between 1/64" aluminum. This spacer sets the coupler up perfectly between the motor shaft and the...

Build sequence

I see Darin is also highlighting his conversion here too. This is the tunnel hull built by Dave Roach. First step was to make room for the electric components by removing all the internal structures used for the gas setup. The photo shows the removal of the formers/bulkhead and installation of...

The context of "Proposal" is better defined as "A working proposal that works" as this new set of rules and new battery chemistry has led to a significant expansion in our club membership over the past year. So great to see new designs from established individuals (like Phil Thomas), ideas and...

Absolutely gorgeous!

Dave, I'm interested. Sent you a PM. Laurie