• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Boats For Sale AC Boats Pro 40

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Andy Nightingale

Well-Known Member
Joined
May 18, 2018
Messages
144
Selling a RTR AC Boats Pro 40, which I've modified to shove an Angstrem 90 in. Engine has had three tanks of fuel through it, can tear it down to prove this. Also includes Rossi pipe, Propshop 5519 stainless prop, homemade turn fin (again can photograph for interested parties, was made from 2mm stainless), all hardware, Savox 236 rudder servo, hitec 430 on throttle and a cheaper hv micro on mix. Would have to remove lipo for shipping.

Not too sure what to price it at so open to offers, how does $600 rtr sound? Plus shipping from UK

I'll sell it minus engine if buyer wishes to build it as a 40 boat, I have the Octura mount to suit a 40, which would require dropping the mounts I've modified to accommodate the massive engine back down again

My lake isn't big enough for it to properly stretch it's legs, so I'm selling to fund my Seaducer addiction...

Any questions or comments very welcome


20210430_112016.jpg


20210430_112021.jpg


20210430_112100.jpg



20210430_112053.jpg
67FF68C2-8BF7-4E0B-9EFF-1B9DC0DEC908.jpg
 
Made by the company of a Russian fella who is unfortunately no longer with us, mid 2000’s. Good hydro motors, high revving.

I’ve got a spare used motor I’ll also include
 
I have a couple of little .21's that might be made by the same guy.. they look just like those .91's
I bought them for a steal from a guy in Russia. NIB never run.
I'm excited to see how they perform in a rigger I have.
If you break one down, I'd love to see pictures of the insides of the motor. Do you know if it is a needle bearing rod and Zimmerman disk?
 
Great boat ...and a Powerful donk....A 90 and 100 were fast as ....Ernie used to deal with them moons ago ...and a fellow in Australia,,send me a shipping quote let me know
 
Last edited:
Needle big end with a work of art for a disk, see the second picture. Crank is two halves supported with four bearings

Third photo shows the piston/ button from my backup engine, which I'll include in the sale. In a different boat it ran super lean and cooked the rod and big end bearings, so it's got a brand new rod installed with new needles, though I ordered the needles from an Angstrem supplier I'm not completely convinced they're the right ones. Notice also the different head button design so not sure how compatible other parts are. First picture is the installed engine, like I say it's had three tanks of 10% nitro fuel and a good soak in ATF afterwards.

Cheapest shipping from the UK to Australia is £150 via DPD


5885BE45-1463-4D49-BD09-C8238DFCADA1.jpg


FAF638CF-0225-453E-8833-1CB2330A23BA.jpg



29ABAA10-98D3-438A-A8B9-62AC2A18B383.jpg


93FDB5E0-10CE-4133-9A1F-846FC4999F6C.jpg
 
Back
Top