Rene Garcia
Member
- Joined
- Mar 3, 2023
- Messages
- 10
Looking to repower an Aeromarine Sprint Cat with a modified 30 cc Gas Zenoah, Which company do you guys recommend out there?
Thanks in Advance
Thanks in Advance
Lamar Huff, Huff racing.Looking to repower an Aeromarine Sprint Cat with a modified 30 cc Gas Zenoah, Which company do you guys recommend out there?
Thanks in Advance
Build your own. All of the info is out there. Nothing magical. Need help, just ask.
Do you have a list of everything you sell somewhere?One way to learn and save money on engines as well as satisfaction of running what you built.
I have engine stands, degree wheels, porting plugs and digital squish gauges for sale if interested to ensure your first attempt at porting is successful.
I have last set of single cut 1/8" carbide bits. They cut very smoothly then you use mini 1/8" flap sandpaper strip arbors that make your port work look good when your done with the cutting.
The only problem is cutting squish band and combustion chamber if you don't have a lathe and/or mill to do that. Can't always set squish exactly where you want with just gaskets so you may need to be setup to cut the cylinder base as well.
The stock bearings are known to fail early on a little too often so best to get something better for main bearings.
Email address and pricing for you mod engines plz and tyOne way to learn and save money on engines as well as satisfaction of running what you built.
I have engine stands, degree wheels, porting plugs and digital squish gauges for sale if interested to ensure your first attempt at porting is successful.
I have last set of single cut 1/8" carbide bits. They cut very smoothly then you use mini 1/8" flap sandpaper strip arbors that make your port work look good when your done with the cutting.
The only problem is cutting squish band and combustion chamber if you don't have a lathe and/or mill to do that. Can't always set squish exactly where you want with just gaskets so you may need to be setup to cut the cylinder base as well.
The stock bearings are known to fail early on a little too often so best to get something better for main bearings.
Do you have a list of everything you sell somewhere?
Email address and pricing for you mod engines plz and ty
Hi do you balance the crank shaft ? TySteve,
I do not have a list. I am sorry. You can find a lot of things I make scrolling back through the manufacturers for sale section.
John,
The fully modded G300PUM 29.5cc is $585 shipped.
Email and Paypal is [email protected]
Thank you,
Daniel
what about sending you a new stock 30 what are we looking at? Going in a scale boat Thanks
Enter your email address to join: