• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

WTB. Old Rossi-new part

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I dont have a pic

The flat slotted head only one jacket for cooling black in color

Its a .67 case with the .90 piston and linner (small block)

horizontal or longitudal carb mounting front housing .

Hope this helps
 
I do belive I have a new one. I will take some pics and measurements and post them for you. Is your's the one with the four screws holding the drum and carb in or just two for the carb??
 
Last edited by a moderator:
I have a new never used carb/rotor housing. I also have a nip piston/sleave, crankshaft. If all you need is the housing let me know.
 
The piston sleave is 1.924" tall, 1.064" id, 1.223 od and 7port 8 if you include the exhaust. I did not take it out of the package to measure the piston so the measurement may be a tad off (thickness of the plastic).
 

Latest posts

Back
Top