WTB. Old Rossi-new part

[Joe Reese]

Needing front drum housing for old .90 rossi.

 

[NITROSNIFER]

How old???. I do have a few and four complete 90's with spare parts. Can you pm me with a pic.

 

[Joe Reese]

I dont have a pic

The flat slotted head only one jacket for cooling black in color

Its a .67 case with the .90 piston and linner (small block)

horizontal or longitudal carb mounting front housing .

Hope this helps

 

[NITROSNIFER]

I do belive I have a new one. I will take some pics and measurements and post them for you. Is your's the one with the four screws holding the drum and carb in or just two for the carb??

 

[Joe Reese]

Four screws holds the drum (Rear) housing and two screws for the carb

 

[NITROSNIFER]

I have a new never used carb/rotor housing. I also have a nip piston/sleave, crankshaft. If all you need is the housing let me know.

 

[Joe Reese]

What is the P/S dimentions and how many ports?

 

[NITROSNIFER]

The piston sleave is 1.924" tall, 1.064" id, 1.223 od and 7port 8 if you include the exhaust. I did not take it out of the package to measure the piston so the measurement may be a tad off (thickness of the plastic).