mark voorhies
Well-Known Member
- Joined
- Dec 13, 2002
- Messages
- 1,285
How many worn out unusable piston and liners do you have laying around. After a couple of years of testing on hundreds of motors I have developed a unigue process that enables me to bring the interference fit back in your worn out piston and liner. This process alows me to fit the piston and sleeve to your choice of just a slight interference ( VERY SLIGHT BUMP) thru a small bump, or a medium bump, or a tight bump, depending on what type of fit you prefer. By using this process you wont have to spend as much time and fuel rebreaking in the piston and liner , the lower part of the liner has allready been broken in when the engine was new (less friction and heat) you will be able to run that special piston and liner much longer with out having to buy a new piston and liner everytime the fit goes away!
If you would like me to refit your motor( any size motor .09 thru 1.00 inch) please read the following!
1. The head bolts or screws must allready be loose.
2. The liner must have been pulled out allready, at least once,( I charge $10.00 extra to remove stuck in the case liners!
3. Send a note telling me what type of fit you would like
and your return adress!
4. After I recieve your engine if I do not feel your engine could benifit from this process I will return your engine along with any monies you have sent except for a $5.00 shipping fee.
Prices
A. .09 thru .49 CI= $30.00 Plus $5.00 return shipping.
B. .50 thru 1.00 CI= $35.00 Plus $5.00 return shipping.
Questions email to [email protected]
Phone 563-264-2972
Send engines to the following address.
dick jones
1811 mulberry
Muscatine Ia 52761
Logged
If you would like me to refit your motor( any size motor .09 thru 1.00 inch) please read the following!
1. The head bolts or screws must allready be loose.
2. The liner must have been pulled out allready, at least once,( I charge $10.00 extra to remove stuck in the case liners!
3. Send a note telling me what type of fit you would like
and your return adress!
4. After I recieve your engine if I do not feel your engine could benifit from this process I will return your engine along with any monies you have sent except for a $5.00 shipping fee.
Prices
A. .09 thru .49 CI= $30.00 Plus $5.00 return shipping.
B. .50 thru 1.00 CI= $35.00 Plus $5.00 return shipping.
Questions email to [email protected]
Phone 563-264-2972
Send engines to the following address.
dick jones
1811 mulberry
Muscatine Ia 52761
Logged