In my opinion, that will be too hot of a setup for that large of a hull. 30-36" hulls require at least an "xl" motor or larger. Personally I run 10-11xl feigao motors and a hv 100amp esc, with 4s in a few 27-32" hydros and riggers and they will work fine. But with that setup it doesn't come alive until I run the same motor on 6s lipo, which is what I usually run. This setup in my 30" shovelnose runs about 58mph and only pulls a little over 70 amps. It actually runs cooler and obviously much faster then the same setup on 4s.I have a 36" wood sport 40 hydro would the motor/esc from the Aquacraft UL-1 work at all in this boat if using a 3 or 4 cell lipo? Thanks
Jeff Lee
What size lipo would the SV27's esc handle, I know the motor says up to 18v. I dont have a definite weight for the boat but its reasonably light for a boat that size.Mid 50's would be great but I could live with 50mph for no more $$ than I would have in the boat. I wouldnt be racing it as there is no organized fe racing in my area.Jeff Lee
Jeff,I have a 36" wood sport 40 hydro would the motor/esc from the Aquacraft UL-1 work at all in this boat if using a 3 or 4 cell lipo? Thanks
Jeff Lee
Enter your email address to join: