roadrunner twin

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nitronewbie

Well-Known Member
Joined
Dec 14, 2003
Messages
162
Any of you guys with your roadrunner twin extremes, I've lost my set up sheet and my notes. What is the measuerment from the bottom of the hull at the transom to the bottom of the ride pad of the rear sponsons. I'm thinking I wrote down 29/32" but can't remember Thanks
 
Any of you guys with your roadrunner twin extremes, I've lost my set up sheet and my notes. What is the measuerment from the bottom of the hull at the transom to the bottom of the ride pad of the rear sponsons. I'm thinking I wrote down 29/32" but can't remember Thanks
John are all of the sponsons on your boat now?. if you boat will set level with 1/8 of plywood under the rears, You would want to record the measurment between the tub & the Table About 1/4 behind the boom tubes. It may be 3/4? If so your measurment @ the rear would be 1/8 higher Or (7/8) @ the transom. The Boat has (BLOW OUT) @ the rear of the tub & tapers Up.
 
Back
Top