• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

OPS 67

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Don Brown

Well-Known Member
Joined
Jul 14, 2007
Messages
595
The OPS was bought new in 2006 from Aeromarine for my E-Hydro. The rigger was destroyed in the second round of the 2006 Nats. The motor was pickled and put away. Last year I scratch built a 1/8 Scale. I used the OPS as my test and set-up motor. Once I was satisfied with the set up I changed the boat over to a CMB “GREENIE”.

OPS .67 Drum Rotor, w/ HD water-cooling exhaust plate (needs 3/16 water fittings)

3/16” Aeromarine Flex Coupling

2 Carbs (one mod, one stock)

OPS 67 Quite Pipe

Extra Crankcase gaskets, Head shims, and Wrist Pin Retainers.

$230.00 and I will pay ground freight to lower 48

Sorry I don’t use Pay-Pal (been burnt too many times)

Money Order Only

Don Brown
 

Latest posts

Back
Top