New Zipp Kit JAE 21 GT

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Both look very sexy! But i like the white one... I MAY be a little biased though since its mine
default_wink.png
lol
 
Last edited by a moderator:
Adam,

Looks like you just need a decal or three to finish it off?

Nice job!

Mark Sholund
 
David here is my jig. Very simple, a flat board is needed with some 1"x 1" angle. You should slot the screws securing the angle to make it ajustable. I use wax paper when glueing to keep the wood from sticking. Use a square to be sure everything spot on.

DSC_0002.JPG

DSC_0003.JPG
 
I also build a jig like Tim said I youse the same jig to build the sponsons on. Drill holes for the boom tube sleeves to sit in and lay them on the jig. I put foam in the holes to push up on the sleeve and weight the sponson down on wax paper. I will post pic soon. My tub is all glues up in the jig also. My jig has holes in the angle to glue the brass tubes in that way it is always square and flat. great kit to build. Zippkits and the boys have done there homework. My 2 year old could build it. (Well not quite)
 

Latest posts

Back
Top