Grimracer
Well-Known Member
- Joined
- Dec 27, 2001
- Messages
- 9,562
For those of you asking…
My P Spec Tunnel and information regarding it as I ran it at the World Championships.
Hull: TSX.. it’s a boat we have been working on for some time.. Brian Buaas did the radio box and set the boat up for some testing we did some time ago.
Im going to list tower links here but the good news is everything but the hull and coupler can be purchased at your LHS
All the electronics except the motor are in a enclosed box (tape) Its really is best to avoid getting your lipos wet..
I used our AquaCraft 2030 motor from the UL-1 as well as the ESC.. I did however place a 35V 2200uf cap on the ESC just in case.
http://www3.towerhobbies.com/cgi-bin/wti00...=LXVSV3&P=Z
http://www3.towerhobbies.com/cgi-bin/wti00...=LXVSV4&P=Z
this cooler
http://www3.towerhobbies.com/cgi-bin/wti00...=LXVXT4&P=7
I used a fuller square drive for 150 cable for the motor to shaft coupler
http://www.gochargeit.com/etools/rayfuller/cart.htm?add=314
I used a OS lower Unit
http://www3.towerhobbies.com/cgi-bin/wti00...=LXCP20&P=7
The motor plate and stand offs were made by me and its was very easy to convert
I used a Great Planes 5000mah 20C 14.8V Lipo
http://www3.towerhobbies.com/cgi-bin/wti00...=LXPWJ4&P=7
I charged with my ever trusty Polycharge 4
http://www3.towerhobbies.com/cgi-bin/wti00...LXKAU0&P=ML
and used these balancers for my pack
http://www3.towerhobbies.com/cgi-bin/wti00...=LXMGS7&P=M
I used our trusty Tactic radio system to guide the boat
http://www3.towerhobbies.com/cgi-bin/wti00...LXWRP3&P=ML
I used a Octura M445 prop but feel I might have missed on this a tad.. Testing has shown that the Grimracer 42X55 with some cup is WICKED fast on this setup.
I don’t have a RTR weight but its close to 6lbs.. the speed on the boat as raced was just shy of 50mph
Questions let me know
Grimracer
My P Spec Tunnel and information regarding it as I ran it at the World Championships.
Hull: TSX.. it’s a boat we have been working on for some time.. Brian Buaas did the radio box and set the boat up for some testing we did some time ago.
Im going to list tower links here but the good news is everything but the hull and coupler can be purchased at your LHS
All the electronics except the motor are in a enclosed box (tape) Its really is best to avoid getting your lipos wet..
I used our AquaCraft 2030 motor from the UL-1 as well as the ESC.. I did however place a 35V 2200uf cap on the ESC just in case.
http://www3.towerhobbies.com/cgi-bin/wti00...=LXVSV3&P=Z
http://www3.towerhobbies.com/cgi-bin/wti00...=LXVSV4&P=Z
this cooler
http://www3.towerhobbies.com/cgi-bin/wti00...=LXVXT4&P=7
I used a fuller square drive for 150 cable for the motor to shaft coupler
http://www.gochargeit.com/etools/rayfuller/cart.htm?add=314
I used a OS lower Unit
http://www3.towerhobbies.com/cgi-bin/wti00...=LXCP20&P=7
The motor plate and stand offs were made by me and its was very easy to convert
I used a Great Planes 5000mah 20C 14.8V Lipo
http://www3.towerhobbies.com/cgi-bin/wti00...=LXPWJ4&P=7
I charged with my ever trusty Polycharge 4
http://www3.towerhobbies.com/cgi-bin/wti00...LXKAU0&P=ML
and used these balancers for my pack
http://www3.towerhobbies.com/cgi-bin/wti00...=LXMGS7&P=M
I used our trusty Tactic radio system to guide the boat
http://www3.towerhobbies.com/cgi-bin/wti00...LXWRP3&P=ML
I used a Octura M445 prop but feel I might have missed on this a tad.. Testing has shown that the Grimracer 42X55 with some cup is WICKED fast on this setup.
I don’t have a RTR weight but its close to 6lbs.. the speed on the boat as raced was just shy of 50mph
Questions let me know
Grimracer
Last edited by a moderator: