- Joined
- Mar 7, 2007
- Messages
- 3,756
So i recently aquired what i believe is a Road Runnner Extreme Hydro that is in very nice shape but ive never rigged or ran a twin in my life, so here comes the questions......!
1- It looks like the boat used a very large servo for the rudder, so what model number Futaba servo would i possibly use?
2-It looks like the boat was set up for one servo per carb, so can i use a Y harness to the receiver to tie the throttle servos together? It doesnt look like the boat had 3rd channel remote needle valves which is fine by me!
3- Im going to make new motor mounts and i dont know where to get the Lord rubber mounts!
Im sure that i will have a lot more questions as id really like to put this rocket together right the first time if possible, but i do claim total ignorance when putting together and setting up one of these boats!! Many Thanks!
1- It looks like the boat used a very large servo for the rudder, so what model number Futaba servo would i possibly use?
2-It looks like the boat was set up for one servo per carb, so can i use a Y harness to the receiver to tie the throttle servos together? It doesnt look like the boat had 3rd channel remote needle valves which is fine by me!
3- Im going to make new motor mounts and i dont know where to get the Lord rubber mounts!
Im sure that i will have a lot more questions as id really like to put this rocket together right the first time if possible, but i do claim total ignorance when putting together and setting up one of these boats!! Many Thanks!