Rudi Arnesen
Well-Known Member
- Joined
- Nov 5, 2003
- Messages
- 518
I have a Daytona rigger with a CMB 90 engine and a Prestwich pipe. Everything is in great condition and the paint is extremely nice. I rebuilt this boat for a friend 5 years ago to help him start race, but it has been resting on the shelf since then. There are Futaba analog servos in, and the engine is in great condition. The boat has installed CMD (Andy Brown) Rudder, strut and flex. The original aluminum sponson tubes have been substituted with Carbon fiber delivered from CMD.
I was out testing the boat yesterday and it run very well with a 1667. The boat is very stable to drive and for the people who have been racing for a long time know these boats dominated the races 20 years ago. Before I went out for testing yesterday the CMB got a brand new carburetor installed.
I will sell the boat complete minus RX. There is missing a standard servo for the remote controlled needle as this died yesterday. I will let the prop I tested the boat with yesterday come with the boat. The prop is an Andy Brown 1667 cupped and modified.
There are some pictures in this topic http://www.intlwater...showtopic=57493
If you want more pictures, let me know and I will send you what you want.
I found the boat to perform very well during testing yesterday and this together with the quality of the boat and hardware makes me asking 650$.
Will split if somebody wants the boat or engine seperate
Buyer pay for shipping and I will ship worldwide.
I was out testing the boat yesterday and it run very well with a 1667. The boat is very stable to drive and for the people who have been racing for a long time know these boats dominated the races 20 years ago. Before I went out for testing yesterday the CMB got a brand new carburetor installed.
I will sell the boat complete minus RX. There is missing a standard servo for the remote controlled needle as this died yesterday. I will let the prop I tested the boat with yesterday come with the boat. The prop is an Andy Brown 1667 cupped and modified.
There are some pictures in this topic http://www.intlwater...showtopic=57493
If you want more pictures, let me know and I will send you what you want.
I found the boat to perform very well during testing yesterday and this together with the quality of the boat and hardware makes me asking 650$.
Will split if somebody wants the boat or engine seperate
Buyer pay for shipping and I will ship worldwide.
Last edited by a moderator: