J jaso Well-Known Member Joined Jul 25, 2003 Messages 113 Aug 7, 2003 #1 Can anyone give me a good starting point length to cut my pipe to on a .90 rigger with a CMB .90 evo-h motor, CMB unmuffled pipe(nitro pipe) , ABC H-50 prop at 25 percent nitro? ;D
Can anyone give me a good starting point length to cut my pipe to on a .90 rigger with a CMB .90 evo-h motor, CMB unmuffled pipe(nitro pipe) , ABC H-50 prop at 25 percent nitro? ;D
nitrotoys Well-Known Member Joined Mar 10, 2003 Messages 1,216 Aug 7, 2003 #2 Going from my CMB .80, and CMB Pipe, I am at 11/58ths. So i would start about 12.5 and see, Dont hold me to it. You might want to send a mail to tidewater eng. and see what they recommend.
Going from my CMB .80, and CMB Pipe, I am at 11/58ths. So i would start about 12.5 and see, Dont hold me to it. You might want to send a mail to tidewater eng. and see what they recommend.