• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

bunch of stuff (MORE ADDED)

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

camaroboy383

Well-Known Member
Joined
Feb 25, 2008
Messages
2,833
1) 20 size turn fins polished $15.00 shipped (new) these fit aquacraft sv hulls with no modifications.

2) 20-40 size adjustable trim tabs polished and blue $17.00 shipped (lightly used)

3) unkown brand old school rudder and water pick up mount / missing a bushing $3.00 shipped (looks new)

4) aquacraft miss vegas engine mounts,,good for small rigger??? $4.00 shipped (used)

5) aquacraft miss vegas flex coupler $4.00 shipped (used,,still good)

6) aquacraft miss vegas turn fin bracket,,factory bracket,, $2.00 shipped (new)

7) aquacraft miss vegas flex shaft with drive dog $7.00 shipped (new)-SOLD-

8) anodized aluminum futaba spline large servo arm,, 1 7/8" overall length $8.00 shipped (new)

9) 2ft small yellow tygon tubing $2.00 shipped (new)

on to bearings..

10) MR608-zz/c3 metal shield on both sides 3 available $8.00 ea. shipped (new)

11) SMR6001-z #5 two available,, one open,,one metal shield on one side $12.00 ea. shipped (new) take your pick

12) MR6202-zz/c3 open on both sides $15.00 shipped (new)

13) tower hobbies heavy duty 12 volt starter (like brand new) missing the rubber starter cone $20.00 shipped

14) aquacraft .18 modified crank,,modded for use of a o.s cvrm back plate,, for belt start upgrade..(never seen fuel new) $20.00 shipped

15) aquacraft .18 modified carb,,barrel port matched to the body venturi's,,and spring installed behind barrel to center it in the bore.. (never seen fuel new) $35.00 shipped ( this is a nice bolt on mod)

16) thinder tiger pro .21 o/b complete,,1.04 : 1 gear set,,,fully modified,,raised port timing,,modified crank timing,,lower cut for pipe,, modded head button,, reduced skeg surface,, runs on 50-70% nitro,, comes with header and htb hp silver bullet pipe.. pipe is like brand new..these engines are getting scarce,,, this one has seen maybe 15 8 oz. tanks of fuel... nice mod class engine...no prop included $375.00 shipped

16) aquacraft modified crank case,,bare case,,no bearings,, ports cleaned up as i do with all my modded aqua's (used) $18.00 shipped

17) 2 aquacraft .18 rods (good used) $7.00 shipped for both

18) 2 aquacraft back plate gaskets (good used) $2.00 shipped for both
 
Last edited by a moderator:
Back
Top