WTB Tuned Pipe Header .40-.46 engines such as O.S. MAX, ASP, Magnum Thunder Tiger

[Lee Whiteley]

Hello,

Would like to buy a Header Pipe for the above listed engines. Better yet here's what I found at Mecoa a great description of what I need:

MAC HEADER MARINE, Item #MAC2593
Mecoa 46
O.S..40-.46 FX,SF (bolt through)
O.S..46-.55 AX, .50 SX
ASP.46
GMS 2000 ABS .40 & .47
Magnum XLS .46-.52
MDS .40-.48 FS Pro
Mecoa .40-.46
NovaRossi Rex R.46/.57 CR
Rossi .45-.53 (new-bolt through)
Royal .46
Tower .46 (bolt through)
Thunder Tiger Pro .40-.46
Y.S. .56 SR (bolt through)
(screws 5/40 x 1 1/2" socket head)
(center to center = 37.08mm/1.460")

Thanks for your help,

Lee (cruisor at ,msn.com)

 

[Rudy Formanek]

Can you tell me exactly which engine you are looking to fit to?? I have NIB 2590's, I have a few marine headers but not 2593s, if you want a 15 degree upsweep, I need to further investigate what I have that might fit.. 2590 is $45.00 shipped. PayPal F&F or add 3.5%.

 

[Lee Whiteley]

Hello Rudy,

Okay I need this header for the Mecoa 46 engine that they just started selling from what I understand.
I went to the Mecoa site and the header I'll need is a #2593.
I sure hope you have one of these as I can't seem to find anything.

Thanks for responding to my query and hope to hear from you soon.

Lee

 

[Rudy Formanek]

Sorry, I dont have any 2593s.The 2590 is the same as the 2593, the 2593 has a 15 degree upkick for marine installation. If you dont need the up kick the 2590 fits nicely. You might be able to bend the 2590 to the 15 degree up kick, you do run the risk of kinking the header hopefully you dont need all of the 15 degrees. I have marine headers for K&B 40 side exhaust.

 

[Tom Foley]

I can make you one with a 7/8" headpipe to fit for $50.00 plus shipping . Just let me know .

 

[Lee Whiteley]

Okay let's make me on up then. Would you mind if I sent you the funds to cover this? Provide me an address through a PM and I'll have it in the mail tomorrow.
Would you make a recommendation for a tuned pipe for this project also.

Thanks so much for your help,

Lee

 

[Lee Whiteley]

We're you going to go ahead and make up the header I need Tom? I sure could use it. Just let me know when and where to send payment for it.
email would help out to I have a hard time finding what I posted cruisor at msn.com
Regards,

Lee

 

[Tom Foley]

Yes , no problem will pm you . I'm not always on here . Do you have a pic of the boat its going in with the engine in place ?

 

[Lee Whiteley]

Here are some picts, hope this helps out.

Thanks,

Lee

 

[Jakenicolson]

Can you tell me exactly which engine you are looking to fit to?? I have NIB 2590's, I have a few marine headers but not 2593s, if you want a 15 degree upsweep, I need to further investigate what I have that might fit.. 2590 is $45.00 shipped. PayPal F&F or add 3.5%.View attachment 274392

G'day Rudy, just came across this post and was wondering if you had the header available for the ASP 46 engine? I believe it might be the 2590 but you'd probably know better cheers Jake [email protected]

 

[Lee Whiteley]

Hello Tom,

Some time ago you and I had this conversation about this header and we never did get finished up. I still need it and the only reason I haven't pestered you about it is because we purchased a new home an then got ourselves moved in. I now have time for boats again and thought we could come up with a header now.

Please let me know if you perhaps have a 2590 on hand. Pictures of the boat are in this thread as well.

Regards,

Lee

 

[Justin Maly]

Sorry, I dont have any 2593s.The 2590 is the same as the 2593, the 2593 has a 15 degree upkick for marine installation. If you dont need the up kick the 2590 fits nicely. You might be able to bend the 2590 to the 15 degree up kick, you do run the risk of kinking the header hopefully you dont need all of the 15 degrees. I have marine headers for K&B 40 side exhaust.

Hey Rudy, I know this thread was from some time ago but I just happened to come across it on a google search so I joined the site so I could reply to you. Any chance that you still have any 2950s on hand and willing to sell?

 

[Rudy Formanek]

I have 2 2590s, they are $45.00 EA plus shipping probably around $8.00 in the lower 48.Paypal friends and family or add 3.5%

 

[Justin Maly]

I have 2 2590s, they are $45.00 EA plus shipping probably around $8.00 in the lower 48.Paypal friends and family or add 3.5%

I would like to buy one from you then. How do I go about getting a hold of you? Website? Email?
Thanks for the reply!

 

[Rudy Formanek]

PM sent.