K&b 3.5 ss needle adjustment

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
also inspect the upper bearing housing area VERY CLOSELY.. if you see ANY spider cracking you will have this issue. Some times you can not see this unless you remove the part
 
Its all about the seal.. if the oil has to seal up a bad bearing then you have this very issue.

then.. tank location.. is it lower in the boat?

Grim
The tank sits on the floor of the radio compartment. I’d lay it’s a good 1 1/2 lower than the carb inlet
 
Back
Top