Search results

It is all back together, now to see if i cant get it over 80 mph

New mounts are in, its a 2mm strip of carbon with brass inserts i printed a new and stronger batterytray and esc mounts aswell

yes! i went heavy to get the smooth finish so its easy to wipe off grease and water :)

I got the old inlay out, and everything sanded. I added a strip of 200g fiberglass in the keel and over the seams. I glassed the motormounts and added them after the inlay with 200g carbon Im really pleased with the result so far, now to get the other hardpoints in

Thank you Liberty! I thought it was just the batterytray that broke, turns out it lifted the inlay(so i guess my prep was bad) so its a full rebuild now I started pulling out the old mount and some of the carbon lifted so its all coming out 🥲🥲 It will be back stronger than before

I got it to run! it did 126 kph after crashing. broke the batterytray loose but its an easy fix so it will be out again soon!

Sometimes the teflon does not fit perfectly and it leaks between it and the brass tube ive had that a few times and its fixed by just adding some tape to the outside of the teflon I hope you find a good solution, leaks suck

I cant tell you if its any diffrent than a round bottom one as its my first boat with a strut but it does work

Just carbon, all the plastic parts are 3d printed

i just did a run on 8s and got 99kph but the river conditions and my nerves where not up for more than that today. next project is a Kulz kustom fountain 115 on 12s

FINALLY!! i have been on the strugglebus trying to get the boat to run rigth and i finally got it figured out. the list of changes and ilterations is so long that i will just skip that and show what ended up working the trimtabs got chopped to 44mm. i swapped the TFL stinger to a RCMK strut...

stump fab made theirs before castle offerd it and if you want to convert a x8s non hydra

I love where this is going! Keep up the great work.

i just watched it, great work!

I built the boat around a 28% cg it just wants to hop, no matter the settings on the strut, trimtabs, or without trimtabs. moving the batteries forward has given some improvement, but we will see how it runs next time out with them as far forward as possible.

well that did not change anything really, tried moving the batts back from where they are in the picure above and that only made it bounce more so thats not what it needs. going to try moving the batteries further forward next time out, i had to cut out alot of the flotation foam to make room...

thank you, its a great event lots of good people and intense racing after talking with a few people it seems like moving the batteries forward like Libertyfrancis suggested is the way forward so i got in to Fusion 360 and made a adjustable battery tray that could fit the onyx 6600 4s packs...

im very interested to see how this turns out!

well s*** the local race was a great event, exept for me.. i crashed my old big chunky on to land when the servo stuck, it ran full throttle on to land, so the prop is dead, stinger is cooked and the rudder is a lil dented.. the GT ONE was better until it wasent, it ran fine but i could only do...

i plan to run it on the 23 for a local oval race and i should get the new batteries then, so i gotta get it sorted for ovals and then i can go chase speed on proper batteries. Ralf Moser? no idear he is not very active in any of the fora im on- but he usually has something to run for the Munich...