Recent content by Alan Whitaker

Hi Mark. Mark I made it. Tom thanks for a very easy to follow set of plans. Alan

Hi, Tent Poles? No carbon fiber 12mm od X 10 mm id with stainless ends on and a wrap of red carbon vinyl. Alan

Hi All. Just wanting to know weight of your Firefighters and speeds, I have 13 and 1/4 less fuel, on a Dasboater 3014 I get low 70s and about the same on a2818. neither prop load the engine engine is a RX 254 with a tournament top end and a Jeroen ally pipe. Alan

Hi Chris. Many Thanks fot that. Alan

Hi All Many thanks for the help, big selection to try, Alan

Hi Guys Thanks for all the replys, so a 6719/3 and a 2718 will be the start Thanks Alan

Hi Eric Many thanks Alan

Hi All what is a good starting prop for a Gas Fire Fighter, Has anybody got a picture of the hardware mounting, also the tube from the underside. Many Thanks Alan

Hi Dave. Have you looked at something like this an all in one. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...em=290193719364 Alan

Hi Dave, If you have a 4" tub it should be approx 4 1/4" inside and 4 3/4" outside the back of the tub should be approx 2 1/4" at the transum, the sponson should be approx 2 1/2 " past the transum, I saw another post about this on another forum, the answer was to use only 1 side of the bracket...

Hi Dave. Have you got a 4" or a 5" tub, I know there is no prob with the speedmaster on the 5" as I am building one as we speek but have seen another post about cutting the rudder mount down. http://www.cobraracing.co.uk/new.htm Alan