[See 2/6/23 post below about lowering price, parting out or trade. Thank you.] Last summer I got the bug to explore FE racing in addition to my primary interest of scale ships. I built a Seaducer SD4 FE 34 exactly per designer Jerry Crother's specs and with unbelievable support from him. I took a peek at a District 11 NAMBA race. Brian and Zach, from District 11, were amazingly patient and helpful with my questions.
BUT, after deliberating back and forth again and again (and again!), I have decided to not explore FE further. I can't manage working on my numerous scale projects (3 in the works; 3 lined up) and put in the needed time to learn FE boats.
So I'm hoping to sell my Seaducer. The boat was in the water just once. It ran beautifully! Add a receiver and your ready to race. I redid my setup using West systems - the JB Weld I first used did not adhere well enough. I also noticed two small surface cracks in the gel coat on the bottom. I put some very light weight fiberglass on them and lightly sanded the back third of the bottom to improve running. The boat has about $1000 in it and I would like to sell for $750. It would best if I could meet someone halfway in the New England area to deliver. But if I need to ship, please add $125.
Finally, if you are nearby and I can avoid shipping, I have 4 CNHL Black series 4S 5000mAh 65C 14.8v lipos with OSE 8mm anti-spark connectors used once for $110. They are just not a size I need for scale boats.
Please ask questions if you are interested. I want a potential buyer to be fully informed and happy with his/her purchase! Thank you for reading. (Note: on Nov 10, I posted this add on the OSE forum).
Here's what's in it for your reference:
Seaducer SD4 FE 34 $230
Metal flake paint 110
Seaducer hardware kit 185
Extra stinger drive 42
Extra flex shaft 19
TP 4060 motor / jacket 140
ZTW 200 amp esc 190
ZTW program card 20
Hitec 645 MG servo 35
ABC 1914 17/45 prop (2) ~60
(1 for sure, pretty sure a
2nd prop is the same - I know
one was more than $60)
TOTAL $1,032
BUT, after deliberating back and forth again and again (and again!), I have decided to not explore FE further. I can't manage working on my numerous scale projects (3 in the works; 3 lined up) and put in the needed time to learn FE boats.
So I'm hoping to sell my Seaducer. The boat was in the water just once. It ran beautifully! Add a receiver and your ready to race. I redid my setup using West systems - the JB Weld I first used did not adhere well enough. I also noticed two small surface cracks in the gel coat on the bottom. I put some very light weight fiberglass on them and lightly sanded the back third of the bottom to improve running. The boat has about $1000 in it and I would like to sell for $750. It would best if I could meet someone halfway in the New England area to deliver. But if I need to ship, please add $125.
Finally, if you are nearby and I can avoid shipping, I have 4 CNHL Black series 4S 5000mAh 65C 14.8v lipos with OSE 8mm anti-spark connectors used once for $110. They are just not a size I need for scale boats.
Please ask questions if you are interested. I want a potential buyer to be fully informed and happy with his/her purchase! Thank you for reading. (Note: on Nov 10, I posted this add on the OSE forum).
Here's what's in it for your reference:
Seaducer SD4 FE 34 $230
Metal flake paint 110
Seaducer hardware kit 185
Extra stinger drive 42
Extra flex shaft 19
TP 4060 motor / jacket 140
ZTW 200 amp esc 190
ZTW program card 20
Hitec 645 MG servo 35
ABC 1914 17/45 prop (2) ~60
(1 for sure, pretty sure a
2nd prop is the same - I know
one was more than $60)
TOTAL $1,032
Last edited: