Prop recommendation for a Shaman 7.5

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Stephen,

The Octura 1450 likes a little back cut on the trailing edge and cupped up to 3.60” to 3.75” of cup at .7 radi

Thanks For Reading,

Mark Sholund
My email is: [email protected]
 
With the hydro style props like these, don’t be afraid to drop that motor either. The shaman responds well to neutral or minute trim adjustments and low engine heights.
 
Has anything been done to the bottom of it , how much weight have you added and where did you put it , what pipe are you running all these are factors also . A worked over 4763 would be a good starting point
 
Back
Top