Davidkrienke
Well-Known Member
- Joined
- Jul 7, 2018
- Messages
- 405
Yes on the white bottom there see how it comes out center and then is mounted crooked pitching to the left . so its like it is turning left all the time. I just wonder why someone would do that .I dont seen any strut that is bent. The stuffing tube on the white boat is bent to one side. It goes thru the hull straight. Just bend it back.
Mike
its actually mounted in the boat crooked at the back. the strut is straight but angling left like it is turning left if it was a outdrive.I dont seen any strut that is bent. The stuffing tube on the white boat is bent to one side. It goes thru the hull straight. Just bend it back.
Mike
Thanks Rob for chiming in on it. Now would be the time to make it surface drive since I am totally redoing both the northwind 20 and the 40 here. I will have to look for a couple surface struts for them and see what I can come up with .I remember doing that on vee hulls to load one side more for better cornering. Its something myself and Andy used to do running the early versions of the AC hulls. It would be interesting to run that hull as a surface drive, the stuffing box caused so much drag.
not sure how well the flat bottom would run with surface drive? (not sure it would be worth it?)Now would be the time to make it surface drive since I am totally redoing both the northwind 20 and the 40 here. I will have to look for a couple surface struts for them and see what I can come up with
Enter your email address to join: