GiantScale13
Well-Known Member
- Joined
- Aug 14, 2005
- Messages
- 48
Just wondering if anyone has heard if a FE version will be released.
I think a Littlescreamers outrunner in one would be fun and cheap.the 12 is too small for FE.
For 4s I've been using .150 drive cables, 6s I use 3/16" drive cables. Zippkits offers a .21 Nitro hardware package, that is what i would probably use if I didn't already have hardware sets. I collected a lot of parts after 15 years of Electrics. LOLHe Jim , thanx for the info . i have seen the set at OSE .. i will try that first , will see how that goes .. i hope the plans will give some advise about where to built what etc etc .. hardware and prop also from OSE ? looks like it will be a nice fun runner for that kind of money !
any other general advise ? what your going to use as motor mount , rudder , drive , prop etc etc ?
thanx allready~~~ !
jeroen
The UL-1 about 3400 to 3800 depending on prop. The rigger should use a little less. When my .21FE hits the water (after it Thaws out in Cleveland, Oh) I'll let you know! LOLHere is a link to the drawings of the JAE21 nitro version. I don't know if the FE version will have the same dimensions. But if the tub size remains the same, my 4s 30C Polyquest 4500's and my 4s Turnigy 35c 5000's should both fit (obviously not at the same time). I guess we'll have to wait a bit longer to know for sure.
http://www.minicars.se/ne/JAE-21G2-1of4.pdf
Does anyone know how much mAh will get used in a one mile heat on a spec rigger or LSH using the UL-1 motor?
Cleveland, huh... I may find out before you do. LOLThe UL-1 about 3400 to 3800 depending on prop. The rigger should use a little less. When my .21FE hits the water (after it Thaws out in Cleveland, Oh) I'll let you know! LOL
Thanks Mike!Just for future reference guys, Jim Geiger who owns Performance Graphix of Virginia will have available, decals of the JAE checkered flag logo as well as JAE21FE decals. He can do them in any size and color you want. Jim is an RC boater that does custom cut vinyl graphics as well as high quality durable printed vinyl graphics that DO NOT need clear coating. So when the time comes, contact him if you need any JAE decals or any other graphics for that matter.
www.pgsignsofva.com
Mike
Enter your email address to join: