hong kong outrigger

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dario Moreno

Member
Joined
Apr 6, 2011
Messages
13
http://i21.servimg.com/u/f21/14/31/90/51/images10.jpg

As this is a new model of 3 points made in plywood and fully assembled. Includes rudder, flex shaft, prop and buttress. It also has mounted the engine mount and the steering servo.

Simply mount the electronics and run.

This boat is perfect for those who do not know how to work with wood and non-trotters, in this case given everything an affordable price, 65 €.

The dimensions of this boat is huge and comes ready to work with lipo 4s-6s (in configuration 2s +4 s)

Specification:

Length: 31.6 "/ 805mm

Width: 565mm

Height: 70mm

Material: Coated Ultra-Strong Wood

Net Weight: 1102g

Gross Weight: 1500g

When you open the box and take it in the hands of a mounting feeling is perfect for cutting wood parts in the assembly of these parts.

The wooden parts are of a hard plywood and the boat comes fully painted.

After mounting the shoes have gone to electronic weighing and no gives a weight of 835gms, so we would be in running order in a 1500gms

http://i21.servimg.com/u/f21/14/31/90/51/imagen10.jpg

http://i61.servimg.com/u/f61/14/31/90/51/100_2416.jpg

Photo by checking the weight mounted ready to run 1898gms

Let's move to set up the electronics, in this case we use a brushless motor and 4S 2500kv 540L of lipo of 5000 milliamps, with 30C Turnigy 150A Etti drive and leave the prop that comes standard with the boat that is 38mm in diameter with step 1.4.

http://i61.servimg.com/u/f61/14/31/90/51/100_2411.jpg

http://i61.servimg.com/u/f61/14/31/90/51/100_2413.jpg

http://i61.servimg.com/u/f61/14/31/90/51/100_2414.jpg

http://i61.servimg.com/u/f61/14/31/90/51/100_2415.jpg

We will test it next week once it's mounted all the electronics and record a video

In the 1 st Test all to think it would be a success since the launch started very well but I had a mishap with the PTO and had no spare so we'll have to wait for another test, but the feelings were of vertigo.


2500kv motor and driven by 4s lipo 5000miliamperios have broken the prop, the next test we will put a metal propeller.

Very happy with the purchase, the boat is fast, stable, cheap and very well made, perfect stop those who want to start and sensations.
 
Last edited by a moderator:
http://i21.servimg.com/u/f21/14/31/90/51/images10.jpg [/ img]

As this is a new model of 3 points made in plywood and fully assembled. Includes rudder, flex shaft, prop and buttress. It also has mounted the engine mount and the steering servo.

Simply mount the electronics and run.

This boat is perfect for those who do not know how to work with wood and non-trotters, in this case given everything an affordable price, 65 €.

The dimensions of this boat is huge and comes ready to work with lipo 4s-6s (in configuration 2s +4 s)

Specification:

Length: 31.6 "/ 805mm

Width: 565mm

Height: 70mm

Material: Coated Ultra-Strong Wood

Net Weight: 1102g

Gross Weight: 1500g

When you open the box and take it in the hands of a mounting feeling is perfect for cutting wood parts in the assembly of these parts.

The wooden parts are of a hard plywood and the boat comes fully painted.

After mounting the shoes have gone to electronic weighing and no gives a weight of 835gms, so we would be in running order in a 1500gms

http://i21.servimg.com/u/f21/14/31/90/51/imagen10.jpg [/ img]

http://i61.servimg.com/u/f61/14/31/90/51/100_2416.jpg [/ img]

Photo by checking the weight mounted ready to run 1898gms

Let's move to set up the electronics, in this case we use a brushless motor and 4S 2500kv 540L of lipo of 5000 milliamps, with 30C Turnigy 150A Etti drive and leave the prop that comes standard with the boat that is 38mm in diameter with step 1.4.

http://i61.servimg.com/u/f61/14/31/90/51/100_2411.jpg [/ img]

http://i61.servimg.com/u/f61/14/31/90/51/100_2413.jpg [/ img]

http://i61.servimg.com/u/f61/14/31/90/51/100_2414.jpg [/ img]

http://i61.servimg.com/u/f61/14/31/90/51/100_2415.jpg [/ img]

We will test it next week once it's mounted all the electronics and record a video

In the 1 st Test all to think it would be a success since the launch started very well but I had a mishap with the PTO and had no spare so we'll have to wait for another test, but the feelings were of vertigo.

[Flash (425.350)]

I'd posted that rigger on the jap rigger post. plus the link on ebay that somebody selling them.
 
Looks like he is trying to say the boat parts fit perfect when you take it out of the box.

Mike
 
Back
Top