Gas Mono Props

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Toni, you need to tell me props you are looking for.
Henry, I have one 2814/3 chopper left and two 3014/2 20* left.
 
Henry, I got your two props done yesterday. I work today, but off work tomorrow and will get them mailed.
Bob,Your one Hard Working Guy.Just reading all the work youve got done in a weeks time makes ME tired!
Maybe when things cool down we can get together on a prop order. Stay well Bob! Joe
 
Ya, Joe I'm starting to feel like a machine. All I do is go to my part time job. Then come home and stand at that work bench and grind away on props. Taking on this site along with the other places I sell props has been a handful. Just since I started here around two weeks ago I have sold and finished almost sixty props. But if there are props you want let me know. Some props I'm starting to run low on. You don't want to ask me for a size prop and I say, you should of asked me for one yesterday, I JUST sold my last one!
 
I have the 2817/3 19* .50 and the 2817/3 23* .47. I don't have any 2615/2 props. The closest I have are the 2617/2.
 
These are all sharpened and balanced props. The first prop is a 3014/2 20* .50 prop. It is one of the newer props ABC has come out with. For a long time if you go back ten years the 3014/2 was always a good mono prop. But it needed to be modded to run good on a mono. Back then it was only made in the high lift 10 degree rake. To make a good runner you had to cut back the tongue a little and then do a back cut to get some of the lift out of the prop. This new one is now a 20 degree rake prop. And if you look at the two blade .50 bar props you will see as the rake goes up the tongue gets smaller. Now no need to mod them. The second prop is a 2814/3 choppper. It is also a 15* rake prop. It is the one prop in the ABC line designed for a mono hull boat. The third prop is a modded 2817/2 19* .50 prop. I have done a lot of these props for guys to run on the mono hull gas boats. It is a fast prop. You can see it in one photo next to a VooDoo Tater-XX prop. The Tater has always been a popular mono prop. It is a 7016/3 with barr cuts and round tips. If you look @ this mod 2817 it is like a big Tater-XX prop. But larger diameter and more pitch. The Tater was always good on a 260 but to small for a strong 29.5 modded engine. This mod 2817 is to much for a 260, but makes a great big block prop. Also the 3014 and 2814 chopper props are more for a good modded 260. The 3014 is a $50.00 prop and the chopper and 2817 are $70.00 each props. The USA shipping is $5.00.
Hi Bob, here’s a good one for ya. I hav 2 Y6’s, one with a Ron Buck modified Zenoah 260, the other with a Quickdraw Hi Torque 26..I had props for them when I moved to Washingto, but when I moved t took the props off of both boats and put them in a box thet had a whole bunch of other props in it and about a year ago I sold that box of props to Mark Williamson. After I shipped it I realized what i had but it was already too late.

now I want to run those boats and I don’t have props. Can you reccomend props for me? it’s only been about 4 years since I’ve had a boat in the water and I’m gettin’ kinda anxious.

Can you help me? Please..
 
Hi Bob,

First of all, do you ship to europe (sweden) ?
Second do you have any:
2514 (3)
2515 (3)
2516 (3)
2517 (3)

2414 (3)
2514 (3)

Regards
Leif
 
Hi Bob, here’s a good one for ya. I hav 2 Y6’s, one with a Ron Buck modified Zenoah 260, the other with a Quickdraw Hi Torque 26..I had props for them when I moved to Washingto, but when I moved t took the props off of both boats and put them in a box thet had a whole bunch of other props in it and about a year ago I sold that box of props to Mark Williamson. After I shipped it I realized what i had but it was already too late.

now I want to run those boats and I don’t have props. Can you reccomend props for me? it’s only been about 4 years since I’ve had a boat in the water and I’m gettin’ kinda anxious.

Can you help me? Please..
Hahhaa -
 
Back
Top