boaterbill
Well-Known Member
- Joined
- Dec 15, 2003
- Messages
- 456
Getting out of the monos. Boats are listed on e bay. Item #3179862567 & #3179867769
21 Microburst RTR, all speedmaster hardw ,incl motor mount, hitec servos,mpi fail safe, volt watch batt meter, fut FP-R113F rx no crystal, nmh batt, nova rossi rx21 rebuilt , less that 1/3 season run, motor still very strong, geraghty carb, 3rd ch Andy Brown remote needle, ops pipe w Dave Preusse stinger, spmaster pipe mount, twin tanks sullivan, turn fins two. No collisions, Hull great shape, white gelkote with hand painted pin stripping, surface drive, 3/16 cable w drive dog speedmaster bushing in strutt, not set up for teflon.speed master trim tabs. Noodles flotation installed. $400 + shpng & ins
67 Microburst, Mack 67 silver head with new blue head water jacket, new P/S, bearings, crb barrell is .440, had made, with K7B venturi pressed in to carb, Steve muck 67 pipe with stinger, 1/4in cable great shape, speedmaster bushing in strutt not set up with teflon, all hadware & motor mount speedmaster, rxc Hitec HFS-03MC no crystal, surface drive set up, no crashes, white gelkote with red sides no collisions, noodles flotation installed. $600 + shpng + ins.
PVC boat stands with foam cushion included with both boats. Both boats are very strong runners, last time runned before I rebuilt motors 67 1st in LaCrosse last Aug in Snowbowl, did not run the 3.5 mono.
e mail me with your e mail address for pics [email protected]
Can take pay pal.
Bill Heacock
21 Microburst RTR, all speedmaster hardw ,incl motor mount, hitec servos,mpi fail safe, volt watch batt meter, fut FP-R113F rx no crystal, nmh batt, nova rossi rx21 rebuilt , less that 1/3 season run, motor still very strong, geraghty carb, 3rd ch Andy Brown remote needle, ops pipe w Dave Preusse stinger, spmaster pipe mount, twin tanks sullivan, turn fins two. No collisions, Hull great shape, white gelkote with hand painted pin stripping, surface drive, 3/16 cable w drive dog speedmaster bushing in strutt, not set up for teflon.speed master trim tabs. Noodles flotation installed. $400 + shpng & ins
67 Microburst, Mack 67 silver head with new blue head water jacket, new P/S, bearings, crb barrell is .440, had made, with K7B venturi pressed in to carb, Steve muck 67 pipe with stinger, 1/4in cable great shape, speedmaster bushing in strutt not set up with teflon, all hadware & motor mount speedmaster, rxc Hitec HFS-03MC no crystal, surface drive set up, no crashes, white gelkote with red sides no collisions, noodles flotation installed. $600 + shpng + ins.
PVC boat stands with foam cushion included with both boats. Both boats are very strong runners, last time runned before I rebuilt motors 67 1st in LaCrosse last Aug in Snowbowl, did not run the 3.5 mono.
e mail me with your e mail address for pics [email protected]
Can take pay pal.
Bill Heacock
Last edited by a moderator:
