• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Assorted items for sale

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Don Ferrette

Administrator
Staff member
Admin
Moderator
Supporting Member
Vendor
Joined
Nov 25, 2003
Messages
16,369
I have some stuff to sell that I don't foresee being needed in the near future. Some stuff is new like the Aeromarine collets (I had no idea I had as many as I do). The tanks are all used and in good shape, most are from various record trial boats using SG/SGX style tubs. The pair listed as #8 I believe are from 80 size Roadrunner twin. They have all been pressure tested and are sold as is so they are priced cheap. Tank sizing is as follows (WF is width front, WR is width rear & if it say max height it means the tank is tapered or not equal height, SS is stainless steel)-

#1- 5 1/2" long, 2 1/4" WF, 2 7/8" WR, 1 3/4" max height - $15 SOLD

#2- 5" long, 2 1/4" WF, 2 3/4" WR, 1 3/4" high - $15 SOLD

#3- 5" long, 2 1/4" WF, 2 3/4" WR, 1 3/4" high, SS - $25 SOLD

#4- 5 3/4" long, 2 1/2" WF, 3" WR, 1 3/4" high, SS - $25 SOLD

#5- 6" long, 2 1/2" WF, 3" WR, 1 1/4" max height - $10 SOLD

#6- 4 1/4" long,1 5/8" WF, 2" WR, 1 5/8" high - $10 SOLD

#7- 5 3/8" long, 3 1/2" wide, 2 1/4" max height - $20 SOLD

#8- 5" long, 3 3/8" wide 1 3/4" tall - $30 pair SOLD

Pair of MACS #1385 13cc pipes brand new and uncut - $45 each or $80 for the pair SOLD

7 new Aeromarine .250" collets fit CMB, MAC, Picco 67/80 motors - $12 each ALL SOLD

Used Kalistratov (CMDi) remote needle w/ mounting bracket - $25 SOLD

67/80 SG/SGX twin motor mount set new in the bag - $65 SOLD

CMDi billet .21 ultra light motor mount new in the bag - $30 SOLD

CMB 67/80 mono style header black powder coated new uncut - $30 SOLD

All prices do not include shipping and please note I will not ship until after this weekend (Christmas) as this is the worst week out of the year to ship anything without risking it going MIA.
 
Last edited by a moderator:
Ok so far...

Aron- K needle and both mount sets

Jeff E.- tanks #3 & #6

Dick- tank set #8 and 2 collets

Jeff M.- tanks #1 & #4

Larry- 5 collets

Tim- tank #2

Bill- 67 header

If each of you would be kind enough to p/m me your complete mailing info I will get totals figured out tomorrow.
default_smile.png
 
I will take the 2-1385 Mac pipes. Drop me a PM with the total when you figure out the shipping..Thanks jw
 
Don what did tank #5,and 7 fit???
Hi Tom, those were used in record trial boats, for a good bit we would run SG/SGX hulls with various sponson designs. I have been building my own tubs in recent times. My best guess is #5 was in a 40 sized hull with reduced capacity (short height) to save weight. I think it might be a good o/b tunnel tank. As far as #7 I'm not so sure where that one got used.
 
Back
Top