G Greg Schweers Member Supporting Member Joined Dec 6, 2003 Messages 23 May 12, 2019 #1 Does anybody have the dimensions for the rear wing and the uprights. I think the wing is 11”x4”
TomGracey Well-Known Member Joined Dec 5, 2018 Messages 466 May 14, 2019 #2 I have built both the 1/6th and 1/8th of the lobster only suggestion is to buy a copy of the Newton Marine drawing and adjust the scaling to 1/10th drawing Sheet 157-A2
I have built both the 1/6th and 1/8th of the lobster only suggestion is to buy a copy of the Newton Marine drawing and adjust the scaling to 1/10th drawing Sheet 157-A2
TomGracey Well-Known Member Joined Dec 5, 2018 Messages 466 May 14, 2019 #3 The 1/8 scale wing is 13 1/4 x 4 3/4
TomGracey Well-Known Member Joined Dec 5, 2018 Messages 466 May 14, 2019 #4 Here YA go 1/10 Scale numbers wing is 10.4 X3.8 inch Vertical's are top 3" bottom 4.8 " height 6' in the middle U can judge the angles off the pic with a protractor or just print the pic an adjust size till its close to the measurements The 1/8 scale part's are valuable from Phil Thomas Hydros
Here YA go 1/10 Scale numbers wing is 10.4 X3.8 inch Vertical's are top 3" bottom 4.8 " height 6' in the middle U can judge the angles off the pic with a protractor or just print the pic an adjust size till its close to the measurements The 1/8 scale part's are valuable from Phil Thomas Hydros