• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

4 CMB Big Block engines 90's-1.0s

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

toadstoys5

Well-Known Member
Supporting Member
Joined
Jan 9, 2004
Messages
366
I'm taking Don's advice and listing each ad seperately. This is for (4) CMB big purple head engines. (2) are EVO's and the other (2) are EVO2's one of which is "brand new" and looking at the piston/sleeve & head button its obviously never been ran. All of these engines have very good compression and I believe all are of the 1.0 displacement variety. I measured the EVO bore and was 1.15" and the never EVO2's mic'd out at 1.10 for the bore.

I believe I had therm at $850 for all four or make an offer on the set or any number individually. Please no "low-ballers" these are good engines with a lot of life left in them with one looking like its never seen fuel.

reply to this post, PM or e-mail below

thanks, Tom

[email protected]

P1030280.JPG

P1030281.JPG

P1030282.JPG

P1030283.JPG

P1030284.JPG

P1030285.JPG

P1030624.jpg

P1030625.jpg

P1030626.jpg

P1030627.jpg

P1030628.jpg

P1030629.jpg

P1030630.jpg

P1030631.jpg
 
Ill take the two EVO 2's. PM me and we will work out a reasonable price based on $850 for all four. Thanks Tom.
 
Last edited by a moderator:
i posted on u last for sale of these engines about 1 the cmb 1.0 how much or both engines. i would still like to be first on these.
 
Last edited by a moderator:
Back
Top