Henrikjensen
Member
- Joined
- Oct 16, 2022
- Messages
- 17
Making my first tunnel boat , just for fun no race class thing .
Printed it all in pla+ but the lower leg will be made in petg if its an succes , just glued the hull today and tommorrow i will skin it with fiberglass.
Hull lenght about 83 cm
Outboard about 30.5 cm tall
Outboard will get 7 bearings , 3 thrust bearings , shock coupler , modul 1 steel gears , motor wise im not sure , texted with dutch guy on youtube that suggested me this forum , i have an 4082 1900kv on the way , i have a new turnigy 3660 1700kv laying arround , but he suggested 3674 1600kv , a lot if selfbuild and not quite sure about durability and how hull will handle , so i will start with 4s lipo but i hope it will handle 6s , i have plenty lipos to start with and i recieved a watercooled 150a 6s esc , and also 1.4 and 1.6 pitch 43 44 45 and 47 mm props .
Printed it all in pla+ but the lower leg will be made in petg if its an succes , just glued the hull today and tommorrow i will skin it with fiberglass.
Hull lenght about 83 cm
Outboard about 30.5 cm tall
Outboard will get 7 bearings , 3 thrust bearings , shock coupler , modul 1 steel gears , motor wise im not sure , texted with dutch guy on youtube that suggested me this forum , i have an 4082 1900kv on the way , i have a new turnigy 3660 1700kv laying arround , but he suggested 3674 1600kv , a lot if selfbuild and not quite sure about durability and how hull will handle , so i will start with 4s lipo but i hope it will handle 6s , i have plenty lipos to start with and i recieved a watercooled 150a 6s esc , and also 1.4 and 1.6 pitch 43 44 45 and 47 mm props .
Attachments
-
20220911_132834.jpg4.2 MB · Views: 1
-
20220912_194657.jpg2.7 MB · Views: 2
-
20220913_123925.jpg4.3 MB · Views: 3
-
20220916_061336.jpg4 MB · Views: 5
-
20220922_173624.jpg5.6 MB · Views: 2
-
20221005_221338.jpg2.2 MB · Views: 0
-
20221005_221602.jpg2.9 MB · Views: 6
-
20221024_164952.jpg1.4 MB · Views: 1
-
20221024_195539.jpg1.1 MB · Views: 3
-
20220910_201347.jpg2.8 MB · Views: 5